[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

762.0. "HUBwatch T2.8" by UTRTSC::GROOT_R (Ronald de Groot) Thu Feb 24 1994 11:26

    
    I installed today T2.8 on a DECstation300 (386SX-16Mhz) with 4MB, QEMM703
    and smartdrv (default = 512k for windows).
    Before that I had installed V1.1 (that was to slow on a DECstation300 to 
    work with) and after that T2.5. To startup HUBwatch for a community
    (DECHUB) takes about 40sec after that to few a module takes about 8sec.
    Not so fast but I get no errors and it is working.
    The install "problems" I have seen are;
    1.The file TSWIN.HLP is TERMWIN.HLP (not a reel problem)
    2.In config.sys PROTMAN.SYS and DEPCA.DOS are remarked what is correct
      but if you use the MSDOS6.x MENU than also the PROTMAN.SYS and
      DEPCA.DOS for e.g. TCPIP for Pathworks will be remarked.
    3.PCSA.DRV and DECW.386 are in the windows directory and not in de
      windows\system directory. (maybe this is right but normal .DRV and
      .386 files are installed in the windows\system directory).
    4.When you use 4DOS50 then it is not possible to load DEPCA.DOS on this
      PC.
    
    Ronald de Groot
T.RTitleUserPersonal
Name		DateLines