[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

761.0. "Hubwatch for Windows T2.8, netbind and Xircom problems" by ANGLIN::ORTHOBER () Thu Feb 24 1994 10:51

	Hi:

	Hubwatch V2.0 T2.8 for MS Windows:

	I can't get NETBIND to work with the xircom
	ndis driver.  Protman loads fine, pe2ndis
	loads fine, but netbind fails, why?

thanks
ort1

T.R	Title	User	Personal Name	Date	Lines
761.1	Hubwatch Windows T2.8 intel Etherexpress NDIS problems	ANGLIN::ORTHOBER		`Thu Feb 24 1994 13:04`	10
	I am also having problems getting this going on an intel ether express ndis board. Same problems. Please help me out on this one. thanks ort1 (This is a customer satisfaction issue with hub 900's)
761.2	Unable to bind	OSL09::OYVINDC	�yvind Christoffersen	`Fri Feb 25 1994 12:09`	14
	Re: .0 I have the same problem. Protman loads fine, cecfg.exe loads fine, cendis.exe also, but running dllndis.exe, which is next in the strtndis.bat, gives the message: DLL0201: Could not communicate with protocol mgr. Initialization Failure. Datalink not installed MS-DOS LAN Manager v2.1 Netbind Error: 1 Unable to bind. Regards, Oyvind Christoffersen @NWO
761.3	Use depca protocol.ini as template	ANGLIN::ORTHOBER		`Fri Feb 25 1994 18:10`	15
	What I did was this: 1) Configure for the depca card. 2) Copy the protocol.ini generated somewhere 3) edit the protocol.ini file and put the vendor's stub at the bottom with a [drivername] just before it. 4) replace all of the =depca and =depca$ with the drivername 5) That should do it. thanks ort1
761.4	It works!	OSL09::OYVINDC	�yvind Christoffersen	`Mon Feb 28 1994 14:00`	3
	Many thanks for your help, Oyvind