[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

758.0. "Hubwatch for Windows T2.8 - Disk 2 cannot be read" by LJSRV1::STRAUB (Windows NT/NetWare Systems Group) Wed Feb 23 1994 13:05

The installation goes fine until it asks for Disk 2.  I put it in, and the system
responds with, "Please insert Disk 2".... and so on, and so on...

I'm testing the install on a Windows NT/Intel system.

Dave

T.R	Title	User	Personal Name	Date	Lines
758.1	fixed	QUIVER::MESSINGER		`Wed Feb 23 1994 14:23`	4
	See note 685.* Fred
758.2	fixed ? yes ..	MEO78A::BARNHOORN	Barney to his friends	`Wed Feb 23 1994 18:42`	7
	the only way to get T2.8 installed is to copy both disks to a temp directory on the hard disk and install from there. Changing labels on the second disk doesnot work. Mark.
758.3	fixed now	CERN::JRS	John SHADE - 'Attila the Nun'	`Thu Feb 24 1994 09:09`	8
	Fred fixed the problem with the kit. It will work with two diskettes now (I just tested it). If you copied your files earlier than today, you should get yourself the new set... -John P.S. NAC::LENAC_USER:[NETWORKS.MANAGE.WINDOWS2.DISK1] & NAC::LENAC_USER:[NETWORKS.MANAGE.WINDOWS2.DISK2]