| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
Hi,
I browsed through this notes file and I couldn't find any entry related
to the problem that I face. So, I suppose that I need to look to my own
environment to find the cause.
When I'm in the LAN INTERCONNECT VIEW and I try to create a new lan
the application craches. I loose all connections from the modules to
the different LANs and I receive an error-message "add failed".
I need to restart the application to get evrything right again.
I tried allready three different versions (Vt2.1, Vt2.3, Vt2.5) all
with the same result.
Does anybody has any idea of what can be wrong in my setup.
Peter
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 731.1 | Not much help but... | WOTVAX::HATTOS | I think, Therefore I'm paid less | Tue Feb 15 1994 07:49 | 14 |
Peter,
I had this in T2.1 but not since.
You are using the r/w community to do this aren't you? Forgive me if
thats insulting your intelligence!
Another easy mistake is to disconnect the repeater providing IP
services from the Thinwire LAN onto something else. You can't manage an
awful lot afterwards.
Sorry its not much help....
Stuart
| |||||
| 731.2 | BIS5::RUTTENS | Wed Feb 16 1994 03:32 | 7 | ||
Yes, I'm using read/write community. Is this supposed to be a problem ?
I did not disconnect the repeater which delivers the ip services for
the hubmgr.
Rgds....Peter
| |||||