[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

730.0. "HUBW T2.5 & Agent900 problem?" by WARNUT::64021::Tim_Banks (Stealth Marketing :-)) Tue Feb 15 1994 05:34

I have a small problem with T2.5, I can't manage a HUB900 (agent900).

When I specify the agent I get an error message back, within milliseconds, 
that the HUB is not reachable (or some such).  I can manage a 900TM repeater 
in the HUB, and a brouter90 out of the HUB, and I can manage the HUB from the 
VMS system sat next to my PC, and I can ping the agent900 from the PC.

I tried setting the MAC address for the repeater in the hub that provides IP 
services, in the HUB900 definition, and switching community names between 
"private" and "public" but to no avail.

Any ideas chaps?

	Thanks

		Tim

T.R Title User Personal
Name Date Lines

730.1 Well I can ! WOTVAX::HATTOS I think, Therefore I'm paid less Tue Feb 15 1994 05:53 13

T.R	Title	User	Personal Name	Date	Lines
730.1	Well I can !	WOTVAX::HATTOS	I think, Therefore I'm paid less	`Tue Feb 15 1994 05:53`	13
	Tim, Is this my 900? If so I have T2.5 managing it ok. You haven't changed the IP address of the repeater or Hub have you? This is a production hub I am setting up. Give me a call and I will tell you the correct community names and IP addresses. Stuart

    Tim,
    
    Is this my 900?
    
    If so I have T2.5 managing it ok. You haven't changed the IP address of
    the repeater or Hub have you?
    
    This is a production hub I am setting up.
    
    Give me a call and I will tell you the correct community names and IP
    addresses.
    
    Stuart