[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

721.0. "Cann't get find address to work in HUbwatch for VMS V2.0" by OFFTAP::G_BURTON () Thu Feb 10 1994 16:38

Hello,

	I have been trying to get the find address 
function to work. It will find DECnet addresses but 
will not find MAC addresses. I have confirmation the 
location of the address I want to find, but receive 
the message Address not found. I'm running HUBwatch 
for VMS V2.0 on a OpenVMS V6.0 system. All Bridges 
and agents are up to rev. 

Thanks,

Grant Burton
CSC/CS-NETWORKS
T.RTitleUserPersonal
Name		DateLines
721.1DECnet MAC or hardware addr?QUIVER::HAROKOPUSThu Feb 10 1994 17:108
    Grant,
    
    Are you specifying the 08-00-2b ... hardware address or the AA-...
    DECnet MAC address?
    
    Thanks,
    
    Bob
721.2OFFTAP::G_BURTONFri Feb 11 1994 18:477
Bob,

	The 08-00-2b.... address. It looks like in the 
windows where you add this value it might be getting 
over run, i.e. not enough room for the complete address. 

Grant
721.3Try DECnet MAC addressQUIVER::HAROKOPUSMon Feb 14 1994 09:1216
    Grant,
    
    My understanding is that the 08-00-2b... is no longer used once DECnet
    is running on the node.   Therefore, the 08-00-2b... address is
    probably aged out of the bridges forwarding database.  If you want to 
    do a find by MAC address for a DECnet node you need to use the AA-... 
    address.
    
    Another item that you probably already know is that in HUBwatch V2.0
    find only works
    for DECrepeater 90's being managed by a DENMA (not the 900 hub
    manager).   HUBwatch V3.0 will support finds on 900 repeaters as well.
    
    Regards,
    
    Bob