Conference netcad::hub_mgnt

679.0. "X.29-Telnet protocol Translation - config & performance?" by FOGDOG::STUART (Scott Stuart - MARVA Network Sales Support DTN 341-3132 - MARVA District) Tue Feb 01 1994 14:11

From looking at the spd is appears that the following 
configuration is valid:


	OFS
	  |
	-------------
		|
		db90

	{	X.25 PSDN	}


		PAD
		 |
	    remote user

A remote user can dial a local access number and use
x.29 to get to the DB90 and then telnet on the LAN to
the OSF system.  At the same time the DB90 is performing
wide area IP/DECnet routing and Bridging over the X.25 
PSDN.  There will be 45 or so remote sites and a headquarters
site with 2 or 3 DB90s.  The customer will purchase a single
X.25 DCE-DTE connection at 19.2 or 56Kbps at each site.

1) Is this a supported configuration?

2) Will it work?

3) Are there any performance numbers for the Telnet<->X.29
gateway function?  How many concurrent users can use that
function?

4) Is there anyway to give the terminal users priority
over the IP traffice, such a large file copy?


Thanks for your help.


... scott

 hi scott,


 seems to be a Brouter dedicated questions, right conference for this products
 is on KALI::DEWBR.

 hope this help

 rdgs

 Jean-Yves