| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
Hereby some experience from just an user, who is managing a repeater
900.
- The performance counters in the Repeater Port Summary window aren't
dynamic. You have to clic on Refresh for new counters.
- A refresh from the security intrusion log entry's don't clear the
entry's, but showing the same entry's twice.
- After disabling a port, you have to select the same port from the
total repeater before you can enable him again. (The enable option can
not be chosen)
Best Regards
Peter Folker
MCS Eindhoven
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 673.1 | more experience with HW Win T2.1 | HLFS00::FOLKER_P | Magis Futundum Est | Wed Feb 02 1994 08:29 | 12 |
Some more experience, managing a repeater 900 with HUBWatch:
Adding more than 2 addresses ends with an information message: Max list
size reached". --> correct becausee only 2 addresses are allowed.
But after remove one address and add another he still showing the same
information message. Only after a cancel and an select i was able to
add my new second addres.
Best Regards
Peter Folker
MCS Eindhoven
| |||||
| 673.2 | HUBwatch T2.3 bugs | QUIVER::PARK | Fri Feb 04 1994 08:55 | 4 | |
These are bugs in the HUBwatch T2.3. We will fix it for the next
release T2.4 which is scheduled 2/7/94. Thanks for reporting bugs.
Jae
| |||||