| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
In the first version of Hubwatch for Windows there was some nice
features such as the inbuilt alarms.
I have seen the canned demo that is out for V2.0 and it looks good.
However what I need to know is it still going to have the alarm
functionality in it.
I have a customer whose decision to buy the Windows version rests entirely
on this. They feel that it is important to be able to monitor all the hubs
in the network at the one time. Without the alarms you can only monitor
the hub that you have currently displayed.
Can you please let me know what functionality with respect to the
alarms is going to be in V2.0.
Thanks,
Jill Finch
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 641.1 | not in V2.0. It will be in V3.0 | SLINK::HOOD | I'd rather be surfing | Thu Jan 20 1994 09:47 | 8 |
HUBwatch for Windows V2.0 is a *port* of HUBwatch for OpenVMS V2.0. Therefore, alarms are not in it. If your customer can wait for a few more months, HUBwatch for <OpenVMS / OSF/1 / Windows> includes alarms. Tom Hood HUBwatch | |||||
| 641.2 | Alarms is comming | LEVERS::SWEET | Mon Jan 24 1994 09:08 | 5 | |
The follow on release of HUBwatch for Windows (dubbed V3.0 for now) will
have alarms support via HP OpenView for Windows. This will be available
in the May timeframe.
Bruce
| |||||