[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

599.0. "Driver for 3Com 3C509 card?" by ODIXIE::RICHARDSON (Are we there yet??) Fri Jan 07 1994 17:18

    Does anyone know what driver to use with the 3COM 3C509 card?  I have
    to set this up on Monday and can't find a specfic driver for the 509. 
    It's supposedly the 10 base T card similar to the 507 so maybe that one
    will work, but has anyone set up a 3C509 card?
    
    Thanks
    
    Cindy
T.RTitleUserPersonal
Name		DateLines
599.13C509 = ETHERLINKS IIIODIXIE::RICHARDSONAre we there yet??Sat Jan 08 1994 14:409
    After a little more research, I have found that the 3C509 is 3Com's
    Etherlink III card.  I found some information on the Etherworks III
    card but these are probably different, huh?  The .ZIP file in the
    .drivers directory is for Etherworks III, so is there maybe a location
    for the EtherLINKS III card?  IF not, any suggestions on setting this
    one up under hubwatch.  If it uses the NDIS, then the NDIS shim should
    work, right?
    
    Cindy