[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

582.0. "DECbridge connectors" by GLDOA::JSCHMIDT (Wire's Wire; Unless it's a Network) Wed Dec 22 1993 14:08

    Will the DECbridge 900 have Configurable FDDI Ports? Single Mode? TP?
    
    Also, I am Assuming the Ethernet ports will be AUI, Is this correct?
    Will the MAU units fit nicely to convert to Fiber, UTP, Thinwire?
    
    Thank's
    
    Jim
T.RTitleUserPersonal
Name		DateLines
582.1QUIVER::SLAWRENCEWed Dec 22 1993 16:485
    Four ethernets are twisted pair, two are AUI.
    
    One of the twisted pair ports can be switched to the DEChub 90 thinwire
    and one can be switched to the DEChub ONE AUI.
582.2bridged or not?VAXRIO::ROLFVaporware Design SpecialistMon Dec 27 1993 10:1212
    re -.1
    
    when you say:" One of the twisted pair ports can be switched to the
    DEChub90 thinwire.." that means WITHOUT going through a bridging
    circuit, similar to the BNC connection on the DEChub90 backplane?
    
    And same with the one connecting to the DEChub ONE AUI?
    
    Or is it a bridged connection?
    
    Rolf. DEC Brazil