[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

569.0. "DEChub 900 and 90 modules" by CTOAVX::BEAULIEU () Thu Dec 16 1993 16:04

    Hi,
    
    I have a DEChub 900 on the wall next to me with a DECbridge 90, a DEC
    repeater 90T and a DEC agent 90 installed in it. I understand that in
    order to manage the 90 units I need the DEC agent 90 and should not use
    the agent in the DEChub 900. When I confiure the DEC agent 90 through
    the asynch line on the front of the unit, the only options availible to
    me are Onehub, DEChub 90 and extended DEChub 90. The later hub options
    automatically put the DECbridge 90 in slot 7-8. To me this is very
    confusing and I am wondering if I am out of REV in the DECagent module. 
    What's the scoop?
    
    Mike Beaulieu
T.RTitleUserPersonal
Name		DateLines
569.1QUIVER::SLAWRENCEFri Dec 17 1993 11:395
    The latest DECagent rev is V1.1.
    
    See note 519.0 on management of 90 modules in a 900; if you have any
    question, reply here.
569.2pointer to V1.1 DECagent 90 on the netCTOAVX::BEAULIEUFri Dec 17 1993 12:3516
    Ok, I know I need a DECagent 90 to manage a DECbridge 90 that is in a
    DEChub 900, (I cannot use the DECagent 900 that is built into the
    DEChub 900) OK.. So I have in slot one a DECbridge 90, in slot 2, I
    have a DECrepeater 90T (lets ignore this module for now because I am
    interested in the management of the DECbridge 90) in slot 3 I have the
    DECagent 90 to manage the DECbridge 90. I do not believe I have broken
    any configuration rules so far. Power everything up. Attach to the OBM
    port on the DECagent 90. Start configuring. Add community.. options are
    standalone, 8 slot hub or 16 slot hub. I pick 8 slot hub (fits DEChub
    900) no matter what I do after this, I have to answer that I have to
    put the DECbridge 90 in slot 7-8. There are no rules about where the
    DECbridge 90 has to go in the DEChub 900. Is this a rule? I have
    DECagent 90 1.0 firmware, I am going to get 1.1 any pointers to the
    code would be helpful. 
    
    Later, Mike
569.3Get the latest DECagent 90 rev firmware.SLINK::HOODI'd rather be surfingFri Dec 17 1993 13:045
    The newest rev of the DECagent 90, I think, has a DEChub 900 community
    type.  Get the latest released rev and try again.
    
    Tom Hood
569.4Location of newer DECagent firmware?CGOS01::DMARLOWEdsk dsk dsk (tsk tsk tsk)Fri Dec 17 1993 14:321
569.5DECagent V1.1 locationROGER::GAUDETBecause the Earth is 2/3 waterTue Dec 21 1993 17:018
QUIVER::PROJ$722:[ONEHUB.RELEASE.DENMA.V1_1]

DENMA011.A;1            666/666     24-JUN-1993 13:10:58.00	! VMS kit
DENMA110.TAR;1          680/681     24-JUN-1993 12:00:26.99	! ULTRIX kit
DENMA_LOAD_PROCEDURE.TXT;6
                         16/18      24-JUN-1993 16:28:06.05	! Instructions

...Roger...