[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

522.0. "Decserver 90l in Hub 90 & 900" by KERNEL::WARDJO () Thu Nov 25 1993 09:35

    Hello,
    
    Following on from note 509.9 can anyone confirm the following:-
    
    For SNMP management with a dechub 90 and Decserver 90L modules only (no 
    repeaters) a Decbride 90 is NOT required in the Hub, only a DECagent 90
    is required on the network?
    
    For SNMP management with a Dechub 900 and Decserver 90L modules in the
    hub, a Decagent 90 is required on the network to manage these modules
    (even if you are using the Hub 900's own agent), but again a DECbridge
    90 is NOT required in each Hub.
    
    If anyone can clarify this for me I would be grateful. The
    documentation I have read so far seems to be a bit vague on this point.
    
    If I am wrong about the need for the Decbridge in the hub could someone
    explain why it is required.
    
    Thanks for any help,
    
    
    Regards,
    
    Jon

T.R	Title	User	Personal Name	Date	Lines
522.1	No bridge required	ROGER::GAUDET	Because the Earth is 2/3 water	`Mon Nov 29 1993 13:42`	4
	You are correct, Jon. You do not need a DECbridge 90 to manage the DECserver 90Ls. A DECagent 90 somewhere on the network will suffice. ...Roger...