[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

502.0. "Cann't add Bridge information when using HUBwatch for windows" by OFFTAP::G_BURTON () Tue Nov 16 1993 15:53

Hello,

	If I zoom down to the decbridge 90 and under configuration select bridge 
information, I want to but in the bridge name. I put in a name and click on ok or 
apply. There is a pause as if the setting took place. Then if you zoom out and 
back down to the bridge and that information, it is not there. Where is that 
information suppose to stored and why isn't it??

Thanks,

Grant Burton
CSC/CS-NETWORKS
T.RTitleUserPersonal
Name		DateLines