Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
Moderator: | NETCAD::COLELLA DT |
Created: | Wed Nov 13 1991 |
Last Modified: | Fri Jun 06 1997 |
Last Successful Update: | Fri Jun 06 1997 |
Number of topics: | 4455 |
Total number of notes: | 16761 |
After I install HUBwatch for window V1.1 on my PC. I got an error when starting the MS-WINDOW : VPKTDRVR: Virtual Packet Driver - Version 1.02g VPKTDRVR: Copyright ........ : all right reserved VPKTDRVR: Licensed to Digital ...... : other distribution or use prohibited. VPKTDRVR: *** ERROR *** : REAL-MODE INIT DID NOT FIND PACKET DRIVER VPKTDRVR: NETWORK FUNCTIONS WILL FAIL Note: DEPCA.DOS driver is being used. VPKTDRVR.386 in in the correct directory (\HUBWATCH\CORE) I double checked with the installing guide and reconfigured again but still got the same error. Anyone has some idea on this error !! Thanks for any help. Andy HKMCS
T.R | Title | User | Personal Name | Date | Lines |
---|---|---|---|---|---|
491.1 | What type of Ethernet Card? | UTRTSC::GROOT_R | Ronald de Groot | Mon Nov 15 1993 11:26 | 3 |
What type of Ethernet Card do you use? Ronald | |||||
491.2 | problem solved but get another problem !! | HTSC19::ANDYNG | Sun Nov 21 1993 22:14 | 18 | |
The problem is solved. DEPCA.COM file is missing ... After copy it to PC disk, ok. Now I get another problem, I cannot PING any of the nodes after the installation. If I start the HUBWATCH and try the AUTO DISCOVERY (with a DECagent 90 connected to the PC), nothing is detected. DECagent and HUBwatch uses the same subnet address and mask. community string is PUBLIC for both read only and read/write. I wonder if I did the setup correctly. Any hint on setting up a DECagent so that the HUBwatch can see it. Thanks Andy | |||||
491.3 | install on another PC, ok !! | HTSC19::ANDYNG | Tue Nov 23 1993 21:44 | 4 | |
install on another PC , ok. Andy |