[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

443.0. "HUBwatch for Windows manging TCP/IP networks?" by VAXRIO::MAURICIO (Fertile Pectus) Thu Oct 21 1993 15:30

    Can we use HUBwatch for Windows in order to manage a LAN built on top
    of DEChub 90, comprised of several PC's (Running both Pathworks/TCP AND
    Novell Netware) and a RISC server (Alpha AXP + OSF/1)? In other words,
    can we use HUBwatch for Windows to manage the DEChub's AND the TCP/IP
    elements via SNMP?
    
    There will be 3 of those LAN's interconnected via TCP/IP over X.25. Can
    we use just 1 HUBwatch for Windows to manage all of them?
    
    Regards
    
    Maur�cio
T.RTitleUserPersonal
Name		DateLines
443.1HUBwatch 1.0, 1.1 provides some management of generic SNMP devicesNAC::FORRESTThu Dec 23 1993 16:138
	Assuming all the nodes support IP and ICMP's PING, you can at least put 
	them on the HUBwatch map and show reachability status. And if the 
	PC's are running SNMP, you can get more info.

	That's with Version 1.0 or 1.1 of HUBwatch for Windows. Version 2.0 
	won't have a map or generic IP management; you should get that back 
	with version 3, which will optionally run with HP OpenView for Windows.