[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

417.0. "DETMI or DECagent with Bus master" by STROP::LAYLAND () Tue Oct 12 1993 05:49

I am trying to put together a DEChub90 configuration. Four sites each site
has three DEChub90's. The sites will be bridged together, forming a ring.
The total No of WAN bridges is eight, therefore I cannot have any bridges in 
the hubs. The hubs will only contain 10baseT repeaters and terminal servers,
and the Brouters. The hubs at each site will be connected together, possibly,
on a thin backbone.  Because of the requirement af manageability and performance
monitoring required, I was considering two possibilities. 1. The new DECagent
with busmaster, and hubwatch, so as to manage the hubs without the need for 
a bridge, plus the probe and probe watch. The problem here is the need for a DEC
agent in each hub (12).  2. using the DETMI, and DECserver90M, with hubwatch, 
plus probe and probewatch. This seems the most cost effective. But I need firm
dates of both of these products. Needed before end 93.

Regards John

T.R	Title	User	Personal Name	Date	Lines
417.1	managing the DS90M	SLINK::HOOD	I'd rather be surfing	`Tue Oct 12 1993 10:02`	9
	I'll let someone else answer about the rest of your note, but as far as the DECserver 90M... You don't need a bridge or a DECagent 90 to manage the DECserver 90M; it's got its own SNMP agent which HUBwatch uses. HUBwatch for OpenVMS VAX V2.0, limited ship now, available thru SSB in early November, fully supports the 90M. Tom Hood HUBwatch
417.2		TMAWKO::PRESSLEY	pin heads are people too...	`Tue Oct 12 1993 13:27`	6
	DecAgent with busmaster? Hopefully I'm wrong, but the last word I heard was that the decagent with busmaster functionality was not going to be available (at least not very soon). My preference would be to see new decrepeater 90's with native snmp.
417.3	we will put agents in repeaters	DELNI::GIUNTA		`Tue Oct 12 1993 14:25`	4
	The DETMI (DECrepeater 90TS) will have a native SNMP agent so that it will not require an agent and/or bridge to be managed in either the DEChub 90, DEChub 900 or stand-alone. It is my plan to have all repeaters have resident agents so that they can be managed in any configuration.
417.4	Thanks for the reply	STROP::LAYLAND		`Fri Oct 15 1993 08:18`	0
417.5	Date on DETMI?	CGOS01::DMARLOWE	dsk dsk dsk (tsk tsk tsk)	`Fri Oct 15 1993 17:41`	4
	Send mail if necessary. Thanks, dave
417.6		TMAWKO::PRESSLEY	pin heads are people too...	`Sun Oct 17 1993 21:49`	2
	The decagent 2.0 will support busmaster. The date I got was January. Happy configuring