[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

406.0. "Wrong MAC-address after upgrading" by FSSB::OSTLING () Thu Sep 30 1993 13:05

    Wrong MAC-address after uppgrading!
    
    On a customer site I have uppgraded a DECbridge 90 and a DECagent in a
    hub. Ihave uppgraded the bridge with WGB_FLASH_V31.SYS and the agent to
    V1.1.
    
    The uppgrade seems to be ok but when I look at the hub from the agent
    then the agent reports wrong MAC-address.
    
    Instead of reporting 08-00-2B-31-D8-A5 you got following:
    
    10-80-02-B3-1D-8A
    
    It is no problem with Ethernet-prom because it's no problem to connect
    the bridge from NCP.
    
    If I sets the MAC-address from the agent on the bridge, it's looks ok
    until you resets the agent then you got the wrong adress again.
    
    Is there anybody who know why ???
    
    Jan-Erik
T.RTitleUserPersonal
Name		DateLines
406.1Agent may need a reset-to-factoryROGER::GAUDETBecause the Earth is 2/3 waterFri Oct 01 1993 14:057
It is recommended that you perform a reset-to-factory settings on the agent when
you upgrade to V1.1.  There are situations where the non-volatile database in
the agent can get corrupted after V1.1 starts up.  The reset-to-factory should
clear up the problem.  Then you should be able to add the bridge and see the
correct MAC address.

...Roger...