[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

387.0. "Autoconfigure, Can you control it?" by GLDOA::STOUGHTON () Wed Sep 15 1993 11:16

    Is there a way to turn off autoconfigure and just manually add devices,
    or just to set them to ping in the initial build of the software?
    
     Current version 1.0

T.R	Title	User	Personal Name	Date	Lines
387.1	More input...	ROGER::GAUDET	Because the Earth is 2/3 water	`Fri Sep 17 1993 17:35`	3
	.0>> Current version 1.0 Of what?
387.2	Autoconfigure is flexible and optional	NAC::FORREST		`Fri Oct 29 1993 09:52`	9
	Greg, if you are referring to HUBwatch for Windows V1.0, then the answer is yes. Autoconfigure doesn't just happen when you start HUBwatch - you have to explicitly run it. And you can run it in a mode where it will discover devices that reply only to PING, but not to SNMP. However, any device that responds to PING will subsequently be queried with SNMP. You can manually add devices too.