| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 371.1 | Documentation too ? | CX3PST::HTKING::M_SHELDON | | Tue Sep 07 1993 11:33 | 15 |
| Now that the DECPACKETPROBE 90 has been announced, any chance we could get
the protection changed on the following files ?
TNPUBS::USER$657:[PUBLIC.ONEHUB]
DECPACKETPROBE90_INSTALL.PS;1
insufficient privilege or object protection violation
DECPACKETPROBE90_USE.PS;1
insufficient privilege or object protection violation
Thanks...
Mike Sheldon
CSC Network Support
|
| 371.2 | PROBEwatch kit location!! | DV780::SANDOVAL | | Sun Sep 26 1993 12:26 | 13 |
| The location of the PROBEwatch kit is:
idas::/usr/kits/PWULT100.tar
idas::/usr/kits/license.com
If there is a need for reference sites on this outstanding product
give me a call or send me e-mail
Eric Sandoval DTN 554-7224
hotair::sandoval
cheers
|
| 371.3 | new location | PERE::BRUCE | | Mon Nov 22 1993 15:55 | 17 |
| idas had a hardware problem the new location is :
18-Nov-1993 NAC::MANAGEMENT:RMON_PROBEWATCH_POINTER.TXT
Pointer to PROBEwatch software:
CIGAM node address:
decnet: 4.173
tcp/ip: cigam.lkg.dec.com (16.20.108.2)
files:
/usr/kits/PWULT100.tar
You should get the PAK from VTX using the name PROBEwatch-for-ULTRIX.
|
| 371.4 | any other location ? | VNASWS::ANDREAS | | Fri Mar 04 1994 09:07 | 18 |
|
Is there any other location (espacially europe) ?
After 6 hours I get :
cobosf.aui.dec.com> dcp -i cigam::/usr/kits/PWULT110-T2.tar.Z PWULT110-T2.tar.Z
dcp: error reading "/usr/kits/PWULT110-T2.tar.Z", Link to partner broken
dcp: close error "/usr/kits/PWULT110-T2.tar.Z", Broken pipe
and from VMS :
Andy_ACT> copy CIGAM::"/usr/kits/PWULT110-T2.tar.Z" vnosf1::PWULT110-T2.tar.Z
%COPY-E-READERR, error reading CIGAM::"/usr/kits/PWULT110-T2.tar.Z"
-RMS-E-NETBTS, network buffer too small for 0 byte record
%COPY-W-NOTCMPLT, CIGAM::"/usr/kits/PWULT110-T2.tar.Z" not completely copied
-Andy
|
| 371.5 | Spool copy it. | QUIVER::GALLAGHER | | Fri Mar 04 1994 09:39 | 11 |
| Finding a European locations sounds like a good long-term solution.
In the short-term, however, you might want to try the VMS FTSV
command. FTSV is a "File Transfer Spooler for VMS". One of the
features:
o If the network link between the source and destination
nodes fails for any reason, the SPOOL copying will not be
aborted. Instead, the batch job will pause and try to copy
the files again later.
-Shawn
|
| 371.6 | European location | BIKINI::KRAUSE | European NewProductEngineer for MCC | Mon Mar 07 1994 06:29 | 22 |
| >Finding a European locations sounds like a good long-term solution.
Stop searching. The kit (PWULT110-T2.tar.Z) is currently being copied to
BIKINI::HUB_DISK:[PROBE]PWULT110-T2.TAR_Z
This is a VMS machine located in Europe (Munich) and hosts all I can get
about DEChub 90/900 (HUB_DISK), Polycenter NetView (NETVIEW_DISK) and
Polycenter Network Manager aka MCC (MCC_DISK).
It is accessible via DECnet (BIKINI is 49.833) and/or via FTP
(hadres.muh.dec.com 16.185.128.45) user 'anonymous'.
Given the amount of stuff I have to keep track on BIKINI, I might miss a
new release. But if you send me mail when a new kit is available, I'll
put it on my disk for public access asap.
MR: Robert Krause @UFC
VAXmail: MUNICH::KRAUSE
DTN: 865-4073
*Robert
|