[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

336.0. "PortSwitch on 900FS" by STKMCC::LUND (Niklas Lund) Mon Aug 16 1993 16:49

    Hi,

    I want to use three repeater 900FS and five repeater 900TM in a DECHUB 900,
    each 900TM repeater should use sepparate Ethernets in the backplane.	
    Is it possible to switch the two fiber ports on a 900FS repeater to 
    different Ethernets in the 900 backplane ?

	Niklas
T.RTitleUserPersonal
Name		DateLines
336.1no port switching available yetDELNI::GIUNTATue Aug 17 1993 10:426
No, you cannot put the different fiber ports on the DECrepeater 90FS (the
correct name should be changed in the system today) on different LAN's
as the 90FS does not support per port switching.  It is just like the
DECrepeater 900TM where the whole module has to be on the same LAN.

Cathy
336.2And in the future?TEMOLO::DELUCA_2Fri Aug 20 1993 04:5411
    Hallo.
    Just a question about PortSwitching on DEChub 900 modules?
    
    Do you think thant it will be possible in future?
    If yes, when it will?
    
    
    Thanks.
    
    	Gilberto
336.3TMAWKO::PRESSLEYpin heads are people too...Sat Aug 21 1993 13:051
    Use the 900 FP it supports port switching.