[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

324.0. "DECHUB 90 Configuration Question" by DV780::SMITHR () Tue Aug 03 1993 01:26

    I am putting together the following DECHUB 90 configuration.  Does it
    follow the guidlines?
    
    
    DECMR is the DECrepeater 90.
    DEWGB is the DEC bridge 90.
    The DECserver 200 will be connected via a AUI to Thinwire MAU.
    The CHIPCOM HUB is a fiber optic DELNI for all intents and purposes.
    
    
    My question concerns the thinwire segment connected to the port on the
    side of the DECHUB 90 backplane.  The rest of the configuration works
    fine as it is.  I am wondering if I connect to the HUB's side port will
    I be breaking any guidlines?
    
    
            DECHUB 90
    _________________________________
    |   |   |   |   |   |   |   |   |
    | E | E | E | E | E | E | D | D |       THINWIRE SEGMENT
    | M | M | M | M | M | M | E | E |__________________________________TERM
    | P | P | P | P | P | P | C | W |           |             |
    | T | T | T | T | T | T | M | G |      _____|_____    ____|__________
    | Y | Y | Y | Y | Y | Y | R | B |      |   VAX   |    |DECSERVER 200| 
    |___|___|___|___|___|___|___|___|      |4000-200 |    |_____________|
                             |||  |        |         |   
    PORT 1:  VXT2000  _______|||  |        |_________|    
                              ||  |A
    PORT 2: VT1200    ________||  |U
            DECSTATION 3100    |  |I
                               |  |
    PORT 3: PC        _________|  |C
                                  |A
                                  |B
                                  |L
                                  |E
             FIBER   ____         |
             OPTIC   |  |         |
     ______  CABLE   |  |_________|
     |    |----------|__|
     |C H |
     |H U |
     |I B |
     |P   |
     |C   |
     |O   |
     |M   |
     |    |
     |    |
     |____|
    
    
    
    Thanks,
    
    Rich Smith
T.RTitleUserPersonal
Name		DateLines
324.1NAC::FORRESTTue Aug 03 1993 16:519
>    My question concerns the thinwire segment connected to the port on the
>    side of the DECHUB 90 backplane.  The rest of the configuration works
>    fine as it is.  I am wondering if I connect to the HUB's side port will
>    I be breaking any guidlines?
 
	Looks OK to me; just be aware that the hub uses up 65 meters of the 
	185 you would normally have. You have 120M left for the 4000 and
	DS200.
324.2A ligoes on.DV780::SMITHRTue Aug 03 1993 21:397
    Thanks for the reply back.  I did not know about the 65 meters on the
    hub.  
    
    
    Thanks again,
    
    Rich