| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 277.1 | "Don't be sad cause 2 out of 3 ain't bad" | CGOS01::DMARLOWE | dsk dsk dsk (tsk tsk tsk) | Fri Jun 18 1993 12:02 | 24 |
|
> 1) Can you connect computer systems with fiber ethernet cards directly
> into the decrepeater 90FL or 900FS or can they only be connected to other
> repeaters?
If the fiber cards comply with 10BaseFL or FORIL then should work
just fine. If you only have an AUI port then you can use the DEFLM-AA
directly on the AUI port and then take the fiber to the fiber repeater.
> 2) Did we work with CHIPCOM on the dechub fiber products?
Chipcom uses 10BaseF which is a synchornous fiber signalling. When
you go into or out of their fiber star, you do not count those as
repeaters. Chipcom was to have created some product to comply with
the more popular FORIL and 10BaseFL as they cannot interoperate
with most other vendors.
> 3) With the packet monitor can we look inside an ethernet packet?(guts)
I understand yes but as to what extent I'll leave to others more
knowledgable than I.
dave
|
| 277.2 | PROBE can look inside packets | NAC::SEAVER | Bill Seaver, HUBwatch Mktg | Mon Jul 05 1993 19:03 | 2 |
| The packet monitor supports all 9 RMON groups and can look inside a
packet. See NAC::MANAGEMENT:RMON*
|