[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

241.0. "Packet Driver shim for NDIS" by VAXRIO::CARIJO (Fernando Carijo' - SME, Rio) Mon May 17 1993 14:55

    I've just copied the Hubwatch for Windows kit from the network, but the
    files necessary to use it over NDIS isn't in the directory mentioned
    (DLLNDIS.V41, DIS_PKT.GUP, PROTMAN.SYS, etc...)
    
    Does anybody knows where I can find them ?
    
    Thank you
    
    		Carijo'
T.RTitleUserPersonal
Name		DateLines
241.1Shim documentation issue fixedEMDS::SEAVERBill Seaver, HUBwatch MktgSun Jun 13 1993 23:3515
    The directions and files on .TWO have been changed to reflect this.
    
From:	MEMIT::DELNI::FORREST      "Jack Forrest LKG2-2 Pole Z5 226-7392"  3-JUN-1993 12:14:50.48
To:	MEMIT::EMDS::SEAVER
CC:	
Subj:	RE: 241- Jack- These files are not on .TWO.  Do you have something 

The notes should refer to DLLNDIS.EXE, not .V41.

DLLNDIS.EXE and DIS_PKT.GUP are on the .TWO directory. I learned  that
PROTMAN.SYS is the property of Microsoft, so we can't freely distribute  it.
However, it should come with Pathworks.

jack