[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

235.0. "Specific traps" by PRSSUD::CARRAYROU () Wed May 12 1993 11:21

    does the DECagent send a specific trap on 
    
    status line 
    load threshold 
    error threshold
    % filtering (decbridge)
    
    

    I own the documentation DECagent 90 user Information  august 31 1992
    ( traps are not supported in version V1.0 of teh DECagent90)
                                                               
    where can I find the trap list or an updated documentation ?
                                                               
    
    
    Thanks
    
    Didier

T.R Title User Personal
Name Date Lines

235.1 V1.1 supports traps EMDS::SEAVER Bill Seaver, HUBwatch Mktg Wed Jun 02 1993 23:16 9

T.R	Title	User	Personal Name	Date	Lines
235.1	V1.1 supports traps	EMDS::SEAVER	Bill Seaver, HUBwatch Mktg	`Wed Jun 02 1993 23:16`	9
	DECagent 1.1 supports a few traps. The following is from EMDS::MANAGEMENT:AGENT.SPD Version 1.1 supports the following MIB II TRAPs: Cold Start Warm Start Authentication Failure It also supports one enterprise-specific TRAP to indicate a hub configuration change.

    DECagent 1.1 supports a few traps.  The following is from
    EMDS::MANAGEMENT:AGENT.SPD
    
 Version 1.1 supports the following MIB II TRAPs:  
	Cold Start        Warm Start        Authentication Failure

 It also supports one enterprise-specific TRAP to indicate a hub 
 configuration change.