| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 234.1 | Changing DECserver90xx chars | SLINK::HOOD | Just add water | Mon May 10 1993 14:24 | 10 |
| Depending on the type of ds90 you've got, you might want to try these things:
DS90L, 90L+, or 90L++:
- Make sure the server is NOT in authorize/manage mode. If it is,
you won't be able to set anything with HUBwatch. Also make sure
you're using the read-write community string for your DECagent.
DS90TL, 90M:
- Make sure the server is SNMP SET enable, and that you're using
the read-write community string for the DECserver90TL.
|
| 234.2 | We can't use it | ZUR01::SCHNEIDERR | | Tue May 18 1993 07:46 | 10 |
| Tom,
Thaks for your answer.
Sorry to say that, but we can't use this. I can't tell a customer to set his
serviers not in authorize/manage mode. Nobody will do that, because everybody
could modigy any parameter in this mode.
Will there be a other solution very soon availible?
Regards Roland
|
| 234.3 | Fix in V2.0 | SLINK::HOOD | I'd rather be surfing | Tue May 18 1993 11:48 | 5 |
| Problem understood. I think I've now got a solution for authorize mode
that should be in HUBwatch V2.0 later this summer. Until then, unfortunetly,
what's in .1 applies.
Tom Hood
|
| 234.4 | We must do it | ZUR01::SCHNEIDERR | | Wed May 19 1993 03:06 | 10 |
| >Problem understood. I think I've now got a solution for authorize mode
>that should be in HUBwatch V2.0 later this summer. Until then, unfortunetly,
>what's in .1 applies.
Thanks Tom,
That is o.k. for us. I hope I'm not the only one, but I think we must implement
this. So we will look forward and stay tuned for V2.0.
Regards Roland
|