[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

223.0. "Unable to copy HUBwatch for Windows kit" by PDVEUS::DELUCAGIL () Mon May 03 1993 13:30

    Hallo.
    
    I proved to copy the HUBwatch kit for Windows, how explained in
    EMDS::MANAGEMENT:WINDOWS_SETUP.TXT.
    
    But i have a problem:
    I was able to copy via Easynet all the files of the 2 subdirectory.
    When i prove to install the kit under my PC Window (rel 3.0 and 3.1) it
    was unable to decompress the following files:
    
    -  DATABASE.LIB
    -  IMAGE.LIB
    -  EXPERTDB.LIB
    
    Obviously, now I cannot start the applications into my PC.
    
    I repeated twice all the procedure, but with the same results.
    
    Wath is the problem?
    Is the VMS COPY command? I proved also using FTSV tool.
    Are the files corrupted in EMDS::?
    
    I need urgently an answer.
    
    Thanks in advance. 
    
    
                                    Gilberto

T.R Title User Personal
Name Date Lines

223.1 Did you use install command? EMDS::SEAVER Bill Seaver, HUBwatch Mktg Wed Jun 02 1993 22:50 3

T.R	Title	User	Personal Name	Date	Lines
223.1	Did you use install command?	EMDS::SEAVER	Bill Seaver, HUBwatch Mktg	`Wed Jun 02 1993 22:50`	3
	Did you use the install command as stated in the instructions. I have seen this problem before with an older installation procedure. In that case it was caused with incorrect decompresssion of the data files.

    Did you use the install command as stated in the instructions.  I have
    seen this problem before with an older installation procedure.  In that
    case it was caused with incorrect decompresssion of the data files.