Conference netcad::hub_mgnt

212.0. "90tl hubwatch zoom problem with latest stuff" by ANGLIN::ORTHOBER () Tue Apr 27 1993 14:17

	Hi All:

	I am having problems getting the 90tl zoom to work
	in hubwatch.

	Here is the setup...

	90TL with 4 MEG

Network Access SW V1.0 for DS90TL BL54-15  ROM 2.0.0  Uptime:   0 00:00:28

Address:   08-00-2B-A1-35-0A   Name:   TEST1              Number:     0
----------------------------------------------------------------------------

	A Hub with an agent 90 as follows

Sets Enabled       DECagent 90 SNMP Network Management Agent               X1.77
Community: public [1]                                                     Name:
Type: DEChub 90-8     IP Address: 16.76.0.100        System Uptime:   0 00:02:50
   [1]       [2]       [3]       [4]       [5]       [6]       [7]       [8]
                                           
                                        90tl        90T       Agent 90   Bridge 90

----------------------------------------------------------------------------

	Hub watch on ultrix version t1.1.18

----------------------------------------------------------------------------

	The 90tl shows up on the hub fine, but when I try and
	zoom in I get...

(W) status poll: can't reach slot 5
(W) DS90TL/90M: SNMP timeout in SUMMARY_B group.
(W) DS90TL/90M: SNMP timeout in SUMPORT group, ports 1:4.
(W) DS90TL/90M: SNMP timeout in SUMPORT group, ports 5:8.


	Any help would be appreciated..

thanks
ort1

	The problem was that I did not have
	the SNMP management enabled and the IP
	address set in the 90tl.

thanks all 
ort1