[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

198.0. "what is specific-trap 4?" by ZPOVC::RAMARAJ () Thu Apr 08 1993 11:07

    What is enterprise specific-trap 4?
    
    I keep getting this from a dual HUB with bridge and 9 90Ts very often.
    I've set the trap address as a VMS MCC station and the alarms comes in
    there.
    
    It sounds like a problem with the HUB, but cannot make out the
    specific-trap 4?
    
    Can anyone shed some light?
    
    Raj
    Singapore
T.RTitleUserPersonal
Name		DateLines
198.1Hub Topology ChangeKALI::GAUDETThu Apr 08 1993 12:566
    This is a hub topology change trap (the only enterprise-specific trap
    the DENMA currently generates).  Anytime something changes in the hub
    (like a port status, adding/deleting modules, etc.) this trap is
    generated.
    
    ...Roger...
198.2What other traps ?WELLIN::MCCALLUMTue Apr 27 1993 11:2914
    
    I can get this trap by removing a module , but not by changing the
    status of a 10base2 port on a DECrepeater 90c - should this generate
    one ?
    
    I can get a coldstart trap also.
    
    What other traps are generated ?
    
    Thanks,
    
    Dave McCallum.
198.3No port status change trap yetQUIVER::GAUDETWed May 12 1993 13:598
    No, not yet.  Currently, the hub topology change trap is generated only
    when communities and modules are added and deleted or a community
    changes size.
    
    Other traps generated by the DECagent 90 are generic traps: coldStart,
    warmStart, and authenticationFailure.
    
    ...Roger...