[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

181.0. "DH90 agents file and agent table" by COL01::LUNT () Thu Mar 11 1993 14:26

    Hi,
    
    
    	Can anyone tell me the correlation between the Agents
    table and the DH90_agents file. When I start Hubwatch it tells
    me that my agent is not found in the table. If I add it to the
    agent table, it always dissappears then I call up manage tables for
    a second time. Do I have to create the DH90_agents file by hand?
    If so, what should it look like?
    Is hubwatch suppose to remember the agents that I add to the table?
    Should it automatically create a DH90_agents file?
    
    After adding agents to the table, leaving hubwatch and then restarting
    it, I still get no agent found in table.
    
    And ideas?
    
    I have Agent V1.0 and the field test hubwatch
    
    Julie Ann

T.R Title User Personal
Name Date Lines

181.1 SLINK::HOOD Just add water Thu Mar 11 1993 15:14 17

T.R	Title	User	Personal Name	Date	Lines
181.1		SLINK::HOOD	Just add water	`Thu Mar 11 1993 15:14`	17
	What version of f.t. HUBwatch are you running? It sounds pretty old. Also, you should be running x1.1 DECagent 90 code (the latest version was x1.74). As of the next HUBwatch IFT, the agents file is: OpenVMS: HUBWATCH$LIBRARY:HUBWATCH_AGENTS.DAT ULTRIX: $HUBWATCH_LIBRARY/hubwatch_agents [This is a change for ULTRIX; previously, the agents file was called DH90_agents and was located at NMS_DIR/uid/DH90_agents.] You must have the logical HUBWATCH$LIBRARY or the environment variable HUBWATCH_LIBRARY defined as the directory that will be used for the agents file. If it doesn't exist, HUBwatch will create it. You can add entries either thru the Manage Table pull-down, or thru a text editor.

What version of f.t. HUBwatch are you running?  It sounds pretty old.
Also, you should be running x1.1 DECagent 90 code (the latest version
was x1.74).

As of the next HUBwatch IFT, the agents file is:
	OpenVMS:  HUBWATCH$LIBRARY:HUBWATCH_AGENTS.DAT
	ULTRIX:   $HUBWATCH_LIBRARY/hubwatch_agents

[This is a change for ULTRIX;  previously, the agents file was called
 DH90_agents and was located at NMS_DIR/uid/DH90_agents.]

You must have the logical HUBWATCH$LIBRARY or the environment variable
HUBWATCH_LIBRARY defined as the directory that will be used for the
agents file.  If it doesn't exist, HUBwatch will create it.

You can add entries either thru the Manage Table pull-down, or thru 
a text editor.