[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

148.0. "LATPRINT box support?" by HANNAH::BUGSBY::COBB (Writing from ALPHA AXP) Thu Feb 04 1993 08:21

    Does hubwatch support a LATPRINT box in the HUB?  I noticed that in the
    'add module' selection there is no choice for LATPRINT.  It is really
    a 90l with 2 ports.  Is thios support planned?
    
    Bill

T.R Title User Personal
Name Date Lines

148.1 Ask development group to get it in HUBwtch EMDS::SEAVER Bill Seaver, HUBwatch Mktg Thu Feb 04 1993 14:36 4

T.R	Title	User	Personal Name	Date	Lines
148.1	Ask development group to get it in HUBwtch	EMDS::SEAVER	Bill Seaver, HUBwatch Mktg	`Thu Feb 04 1993 14:36`	4
	we are looking at this. So far Ihave not see much demand. Ideally we would like to develoopment group to support this as we are running out of time jsut developing HUBwatch without supporting all new modules.

    we are looking at this.  So far Ihave not see much demand.  Ideally we
    would like to develoopment group to support this as we are running out
    of time jsut developing HUBwatch without supporting all new modules.