[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

109.0. "HUBwatch demo which kit ?" by WARNUT::PURNELLR ( Life, it's not what I thought it was !) Wed Dec 23 1992 08:04

    
    What is the most reliable form of HUBwatch to demonstrate segmentation
    on a DECrepeater 90T.
    
    I have used the HUBwatch for Ultrix V1.1, this proved very flakey not
    letting me register DECrepeaters 90C or 90T there was also no real-time
    display of the indication lights on the HUB as I have seen previous on
    HUBwatch for Windows.
    
    The trial will be to demonstrate segmentation on a DECrepeater 90T,
    with HUBwatch detecting the line going from bad to good. The demo will
    be on customer site (Jan 5th).
    
    Can anyone help ?
    
    Merry Chritmas,
    
    *<;*)
    
    Rex
T.RTitleUserPersonal
Name		DateLines
109.11.0 front panel shows partitioningEMDS::SEAVERLENAC Net Mgnt Mktg 223-4573Mon Dec 28 1992 10:236
    Should work with HUBwatch for ULTRIX/MSU 1.0, just looking at the front
    panel view LEDS.  I think it works even when polling is turned off, but
    I would suggest you check that detail.  The next version of 1.1 should
    also work at this level.  Windows will show when the module
    partitions, but it does not show when it goes back to good, except the
    alarm can be canceled.  (Let me know if I'm wrong on this).