[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

97.0. "Problem with Hubwatch for DOS" by WOTVAX::HATTOS (I think, Therefore I'm paid less) Fri Dec 04 1992 09:19

    
    Hi,
    
    I have managed to install HUBWATCH for DOS and can successfully ping an
    IP node.
    
    However, when I start HUBWATCH I get a message cannot find DLL for my
    language message.
    
    I click OK and it goes away, and HUBWATCH main screen appears. The
    message then comes back, I click it, it goes away.
    
    Worse than this however, I now need to create a new network, so I pull
    down CONFIGURATION select NETWORK then NEW. I get the dialog box which
    i fill in with a network name and a password. I dont select a
    background. When I click OK to accept this I get the following message.
    
    
    			APPLICATION ERROR
    
    	CORE caused a General Protection Fault in module
    	CORE.EXE at 0023:0EEC.
    
    
    This happens everytime, what is it and what can I do?
    
    Thanks Stuart
T.RTitleUserPersonal
Name		DateLines
97.1Password does not work in WindowsEMDS::SEAVERLENAC Net Mgnt Mktg 223-4573Tue Dec 08 1992 20:475
    Don't enter a password.  This is a know bug with this version of the
    software.  The DLL error also bothers me.  I would sugget you clean out
    your data base before you do anything else and see if the error goes
    away.  See EMDS::MANAGEMENT:WINDOWS_SETUP.TXT (I revised it after I did
    the general distribution.  Try the new copy.