[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

86.0. "HUBwatch for VMS, Docs or help" by COL01::LUNT () Wed Nov 25 1992 13:59

    Hello,
    
    
    	We are trying to get HUBwatch running on the VMS platform.
    We have our DECagent running, configured with an IP-Address and
    name. We can register it as an SNMP entity with DECmcc and
    see two interfaces. When we try to run HUBwatch however, we
    always get the status that our DECagent is "unreachable" and get
    8 blank DEChub slots. We have invoked
    Hubwatch from DH90_main.com after editing this file to contain
    the correct internet address of our agent.  We also tried invoking the
    DH90_main.exe directly and entering in the internet address,
    name and community in the window. Same thing. Also, we get this 
    "unreachable" status, although in
    UCX we can do a loop and the agent is "alive" 
    
    
    As we have no documentation on HUBwatch, we are not sure what
    we may be doing wrong. Does any one have any ideas or documentation.
    On EMDS I couldn't seem to find a documenation. Did I miss it?
    
    Thanks in advance,
    
    Julie Ann
T.RTitleUserPersonal
Name		DateLines
86.1version of decagentCOL01::LUNTWed Nov 25 1992 14:5812
    Hi again,
    
    	We just noticed, when we access the DECagent
    via the console, the version is: T1.02
    
    Is HUBwatch verion specific, i.e. do we need a certain version of the
    DECagent to run HUBwatch?
    
    Thanks again
    
    Julie Ann
86.2VMS seeds will be out by 15 DecemberEMDS::SEAVERLENAC Net Mgnt Mktg 223-4573Mon Nov 30 1992 22:403
    Documentation on this is limited as we are not officially supporting
    this.  I will try to get you an answer, but youmay have to wait until
    15 December when VMS comes out for seeds and field test.
86.3you must synchronize HUBwatch and Agent revsMEMIT::FORRESTWed Dec 16 1992 17:046
	T1.02 of the DECagent may not work with V1.0 of HUBwatch. You should 
	copy over V1.0 of the DECagent code - you will still need V1.0 or V1.1 
	of the DECagent to work with HUBwatch for VMS, when it is released.

	jack