[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

77.0. "Polycenter/MSU/MCC and HUBwatch" by SAC::LANG_H (Button up your overcoat) Wed Nov 11 1992 12:39

    Hi,
    
    
       I have a couple of questions regarding HUBwatch.
    
    As I understand it, the DECagent 90 requires a HUBwatch product for its
    graphic management and HUBwatch for Ultrix requires Polycenter SNMP
    Manager.
    
    a) Is Polycenter SNMP Manager a rebadged MSU ?
    
    b) Is it yet possible to run HUBwatch for Ultrix over DECmcc BMS ?
    
    
    Thanks for any replies.
    
    
    Harvey
T.RTitleUserPersonal
Name		DateLines
77.1yes, yesMEMIT::FORRESTFri Nov 13 1992 13:0619
	Another way to say it, is that HUBwatch graphical management 
	requires a DECagent 90.

	a) Yes, it is MSU renamed.

	b) It is possible to launch HUBwatch from the DECmcc map.

	   See instructions in public directory - ENGINE::MANAGEMENT:

	Future: HUBwatch V1.1 can run just on ULTRIX - neither MSU nor MCC 
		will be a requirement, though you will be able to launch 
		HUBwatch from those maps. You will order only one kit for 
		any of the following environments
		1. standalone on ULTRIX
		2. with MSU
		3. with DECmcc BMS

		There will be a HUBwatch for VMS that behaves the same way