[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

65.0. "Failure installing HUBwatch on DECmcc V1.2" by LARVAE::POETT () Fri Oct 16 1992 13:12

Hi,

I'm trying to install HUBwatch on our DECmcc V1.2 for Ultrix demo system 
in order to launch HUBwatch as an application. I've copied the kit 
hubwatch_v1.0_setld.tar from SNMPD but get the following failure.

DEC HUBwatch for DECmcc/MSU (MMAHWMSU100)
Copying from HUBwatch (disk)
        Working....Thu Oct 15 16:50:54 WET DST 1992
   Verifying
sh5: /usr/kits/msu/uid: bad directory
setld:
The subset control program for subset MMAHWMSU100 failed.

As this kit was targeted for use with MSU am I using the wrong kit?

Thanks for any help.

Regards,

Dave
T.RTitleUserPersonal
Name		DateLines