| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
If TSM can manage the DEC HUB family of product and DECagent can do the
same. What's the difference?
thanks
kam
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 29.1 | TSM is MOP-based, _NOT_ SNMP-based | NOHOST::LEVIN | Bryan, LENaC Engineering, MLO3-3/U39 | Thu Feb 20 1992 22:02 | 10 |
TSM can _NOT_ manage the whole family. At best, it can manage the new
telnet/lat terminal server. Currently, I don't believe there's planned
support for the 90L or 90L+ (I may be out of date on this, though).
TSM connects via MOP console_carrier, so the management is provides is
network bandwidth wasteful (MOP 'idles' the line WAY (!) too much), and
non routable (cannot pass through routers, and is, therefore, no good
on wan networks).
.bl
| |||||
| 29.2 | TSM can handle 90L and 90L+ | EMDS::SEAVER | LENAC Net Mgnt Mktg 223-4573 | Sat Feb 22 1992 18:00 | 4 |
TSM can manage all the terminal servers that are in the DEChub. EG 90L,
90L+, 90TL. The upgrade was made some time in Q2. For the 90L and I
think tht also includes the 90L+. For more information on TSM contact
Jim (TOOK::TOWNSEND).
| |||||