| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 727.1 | Right port? | PRNSYS::LOMICKAJ | Jeffrey A. Lomicka | Tue Jan 09 1990 10:21 | 2 |
| I would assume that you would do that with the serial port, not the Midi port.
Midi is a data-only port, 5ma current loop at 32000 baud.
|
| 727.2 | re: 727.1 | SUOSW4::SURAUF | | Wed Jan 10 1990 03:06 | 9 |
| Hi Jeff,
on the serial port is already a TNC connected. The reason is, i
need one other TNC connected to the Atari. Somebody did it already,
but i forgot who it was.
Another question: What ist the correct setup for a LA75 to use it
on the Atari?
Regards,
...Rolf (DD2FX)
|
| 727.3 | LA75 hookup | PRNSYS::LOMICKAJ | Jeffrey A. Lomicka | Wed Jan 10 1990 10:33 | 7 |
| Ideally, you us an LA75-P variety on the parallel port. If it's a
regular LA75, read 726.3. The hookup will be the same.
I don't know about software configuration for the LA75. Rumor is that
the LA75 has an IBM mode that may be more useful than the DEC mode. I
DO have a simple print-screen desk accessory that will generate sixels.
Look at PRNSYS::DUA2:[LOMICKAJ.HOBBY.ST]PSLA50.C,.ACC. Monochrome only.
|
| 727.4 | LA75 | SUOSW4::SURAUF | | Wed Jan 10 1990 11:00 | 5 |
| Hi Jeff,
thak you for the information. I will try it tomorrow.
Bye,
Rolf
|
| 727.5 | LA75 setup | KBOMFG::HEIDEN | | Fri Jan 12 1990 08:00 | 33 |
|
re. LA75 Setup
The LA75 works in IBM Emulation mode with the ST without major
problems.
I use the following setup:
- ST side, printer configuration: Matrix
S/W
960
maximum resolution
seriell port
seriell port : 4800 baud
xon/xoff flow
parity none
8 bits
1 stop bit
full mode
- LA75 side : standard setup apart from
IBM emulation
4800 baud
Using this configuration you can print from the desktop and do screen-
hardcopies. But you can't use with this setup in 1stWord because
1stWord cannot handle xon/xoff on the seriell line (at least my version
cannot do it). You would have to change to 300 baud and switch the
xon/xoff option off (ST side).
hope this helps,
Matthias
|
| 727.6 | re: 727.5 | SUOSW3::SURAUF | | Fri Jan 12 1990 08:27 | 4 |
| Thanks a lot Mattias,
i will try it on the weekend.
best regards Rolf.....
|