| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 317.1 | LCP01=LCG01 | DORIS::JAMES | Left Handed People are Super Natural | Tue Nov 29 1988 07:18 | 4 |
| The LCP01, now known as LCG01, accepts ReGis, GIDIS, NAPLPS, UIS
and Colour Sixels. Does VTNEO produce colour sixels?
...Howard
|
| 317.2 | UIS directly on LCG01? | MRSVAX::MISKINIS | | Tue Nov 29 1988 13:21 | 5 |
| I know you can render UIS files (/DEV=LCG01), but is there an
easier way? As far as getting (color) .NEO to UIS or SIXEL files
that would be GREAT!
_John_
|
| 317.3 | reply .0 | PILOU::ANDERSEN | Deallocating my spare time to free | Wed Nov 30 1988 02:06 | 3 |
| Yes VTneo produces a VT240 color sixel output. Why don't you just
try. ?
Good luck,
|
| 317.4 | Eureka! (well almost) | RDGENG::KEANE | | Wed Nov 30 1988 03:41 | 25 |
| Hi,
I did, I did !!
I actually got an image out of the lcp01, unfortunately it is half
size. Apparently there is a escape sequence, what I can put in the
sixel file header, which will double the size, (if only I new what
it is). any offers??? . Also the color rendering is a bit pukey,
all the background is matt black.
Its the first time I have actually seen the LCP01 "burst" ?? into
life and do its thing. Its quite frightening, with the whirring
and hissing of the vacuum system, and then the couple of minute
wait while the drum spins and the carriage scans.
Even if the output was crud, the experience was worth while!!
Back to the drawing board.
Cheers
Pat K.
|
| 317.5 | SIXEL file aspect ratio change | MRSVAX::MISKINIS | | Wed Nov 30 1988 12:53 | 5 |
| In the first line of the sixel file (edit it), look for the
escape sequence that ends in lowercase Q (<ESC>somethingq) and
change the number before the q to 9.
Let me know...
|
| 317.6 | will it drive a lj250 as well | BAHTAT::REID | | Wed Nov 30 1988 12:53 | 7 |
| Can you explain to a thick District Manager (frustrated ex techie)
just what you did and will it work to a lj250 as well. I 've got
ST520 & DEGAS ELITE. What else do I need and where can it be obtained.
I have Uniterm and Kermit set up. NODE::ERIC.
Thanks in advance.
|
| 317.7 | NEO to Sixel | RTOIC1::HSCHOENING | George Schoening PSG Munich | Fri Dec 02 1988 10:02 | 24 |
|
Hi Patrick,
Where can I find the VTNEO.EXE NEO to SIXEL converting file?
We have LJ250 and LCP's here at DECdirekt and would like to
show some good printout as demonstration set.
I use a 1040ST with ICTERM and Kermit to connect.
I got a file called CSIX.EXE to convert IFF and HAM files into
Sixel.
If any interrest drop me a VAXMAIL please no " ALL IN ONE "
and I make it available.
It should be in RTOIC::$1$dua7:<hschoening.a1.picture>
I hope I don't forget to change the protection.
With binary regards,
George
|
| 317.8 | Pointer to NEO exe's | PILOU::ANDERSEN | Deallocating my spare time to free | Fri Dec 02 1988 19:47 | 6 |
| POINTER : SEE NOTE 221.1 FOR NEO-> PIXEL
They seem to be there, but maybe you should drop Bjorn a mail.
����Martin
|