| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 71.1 | ST_CAD de-arcs on the ST | MILRAT::WALLACE | | Fri Apr 29 1988 11:46 | 9 |
| Have you tried de-arcing it on the ST? It de-arced fine for me
on the ST. I had one arc file recently that wouldn't de-arc with
VMSSWEEP on the VAX and it de-arced ok on the ST, but I don't recall
if that was ST_CAD.
I no longer have ST_CAD on the VAX but if you can't get ARC to work
on it on the ST then I can up load it for you.
Ray
|
| 71.2 | ST-CAD | NEXUS::COMULADA | | Fri Apr 29 1988 13:58 | 2 |
| I WOULD LIKEA COPY OF ST-CAD IF POSSIBLE...SEND IT TO........
NEXUS::DISK12:[COMULADA.ATARI]........THANKS
|
| 71.3 | On the net | MSDSWS::PALMER | Ed Palmer @JMO, DTN 356-6612 | Fri Apr 29 1988 14:40 | 5 |
| ST-CAD is available at
MSDSWS::DISK$USERS:[PALMER.ST]ST_CAD.ARC
--Ed
|
| 71.4 | Unable to de-arc | DORIS::JAMES | Howard James/PSG Tech Support/Queens House | Mon May 09 1988 08:40 | 4 |
| I too have been unable to de-arc it. Perhaps someone would be kind
enough to put the two de-arced files on the net.
Thanks.
Howard.
|
| 71.5 | Another copy of ST_ARC | MILRAT::WALLACE | | Mon May 09 1988 13:31 | 7 |
| I have an archive of ST_CAD that I ARCed on the ST it has both
the doc file and the executible. This ARC contains the files originaly
posted on USENET but it is NOT the same ARChive.
MILRAT::DISK$USER3:[WALLACE.PUBLIC.ST]ST_CAD.ARC
Ray
|
| 71.6 | 71.5 works | DORIS::JAMES | Howard James/PSG Tech Support/Queens House | Tue May 10 1988 05:03 | 3 |
| Thanks Ray. I copied it and it de-archive with VMSSWEEP on the VAX
and ARC on the ST. Great stuff.
..Howard
|
| 71.7 | 1 year later - same problem | SKYWAY::TSCHECHTELIN | TSCHECHTELIN FRANZ-PETER alias FRAPE | Mon Jul 17 1989 14:41 | 55 |
| Dear Atari Users,
I have the same problem as in .0 and .4 .It doesn't work to dearc it on the
Atari, Vaxmate and on the Vax (vms5.02).
I have also tried on the Vax with Vmssweep V3.1. The descr. location on the
Enet are all gone, exepted the place of MSDSWS::... but with this Version is
no way.
thanks for any Hints
Frape
-------------------------------------------------------------------------
Frape > ARC
V M S S w e e p V3.4
for .LBR and .ARC files
Enter "library": ST_CAD.ARC
Error on READ: input record too long
++ There is 0 member ++
# Member Name # Bytes CRC Date Time Stor. Type Actual Len
---- ------------ ------- ---- -------- ----- ---------- ----------
Enter command [?]:
Frape > DIR/FU ST_CAD.*
Directory USER7:[TSCHECHTELIN.ATARI]
ST_CAD.ARC;2 File ID: (24738,45,0)
Size: 43/45 Owner: [7YV,TSCHECHTELIN]
Created: 29-APR-1988 12:35:39.00
Revised: 17-JUL-1989 19:05:15.83 (5)
Expires: <None specified>
Backup: <No backup recorded>
File organization: Sequential
File attributes: Allocation: 45, Extend: 0, Global buffer count: 0
No version limit
Record format: Stream_LF
Record attributes: Carriage return carriage control
RMS attributes: None
Journaling enabled: None
File protection: System:RWED, Owner:RWED, Group:RE, World:
Access Cntrl List: None
Total of 1 file, 43/45 blocks.
|
| 71.8 | file is in wrong format for VMSSWEEP | OLDTMR::WALLACE | | Mon Jul 17 1989 14:49 | 6 |
| Sounds like you need to one of two things,
Run cvtarc on it (ie: $ cvtarc v st_cad.arc)
-- or --
Use VMS arc instead of vmssweep to dearc it.
Ray
|