[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference marvin::x25psi

Title:Packet Switching Products
Notice:Kits/Docs are NOT available. on the net.
Moderator:MARVIN::COBB
Created:Mon Apr 09 1990
Last Modified:Thu Jun 05 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:3752
Total number of notes:14903

3750.0. "Only 26 SVCs could be opened" by DEKVC::SANGHOKIM () Tue May 13 1997 09:35

This is X25 SVC connection problem.
Only 26 SVC's(Switched Virtual Circuits) can connect to VAX PSI access system
via X25gateway (DEMSA), and the other SVCs(more than 26 SVCs) is failing with 
CALL CLEAR.
In other words, The most SVCs which could be opened between an X25 simulation 
program on VAX PSI access system and an application program on UNIX machine is 
26.
The outgoing list (channel range) of X25gateway is 50, so only 26 SVCs can
connect to VAX system and the other 24 SVCs is failing with CALL CLEAR.
Cause code is 0, and Diagnostic code is 0 in CTF.
Available outgoing list is always 24 In NCL command
( ncl> show x25 prot dte dte-1 all ) when only 26 calls are connected.
 
Followings are action done so far, but nothing is changed.

. Increased CHANNELCNT, NPAGEDYN, NPAGEVIR
. Increased NSP max remote NSAP, NSP transport connection
. Checked max circuit of X25 SERVER, it was 512. 

Their environment is as follows;

	Open VMS/VAX V6.1
	DECnet/OSI V6.2 plus ECO4
	X25gateway V1.0 (X25$GWY010_128)


Any help will be highly appreciated.
Thanks in advance.
Sangho / Korea TSC
T.RTitleUserPersonal
Name		DateLines
3750.1MARVIN::CARLINITue May 13 1997 09:507
Use CTF to trace on the VAX, on the Gateway and on the Unix host to isolate
which of the three is clearing the call.

Check the OPCOM logs on the VAX (and have the Gateway direct its events to the
VAX too) and check those to see why the calls are being cleared.

Antonio
3750.2No Matching FiltersDEKVC::SANGHOKIMFri May 16 1997 09:051130
OPCOM logs, CTF Traces and NCL scripts are attached.

OPCOM error is 'incoming call fail' and the reason is 'No Matching Filters',
but I don't think the problem is in filters because 26 SVCs are opened
without any problems, they are using same filter.

DTE address is 6789012345 but failing SVCs are always calling some different
DTE address like that 678901234406, 678901234407, 678901234409, 678901234410,
546000000000 and 000000000000. 
Whenever some SVCs are failing these 6 address are always called,
but 26 SVCs which has no problem are always calling correct DTE address,
6789012345, you can see this in Traces and OPCOM messages.

Please check attached files and let me know what is wrong.

Thank you for support.
Sangho /Koreac Tsc
-------------------------------- Attached -----------------------------------
1. Trace file
   ==========

$trace start/live x25pvc::"x25l3 dte dte-1"/fu/data=(hex,asci)
%CTF-I-CONNECTING, connecting to trace collector...
%CTF-I-TPSTRACED, 1 tracepoint being traced
Trace started on 15-MAY-1997 18:04:58.06  Analyzed on 15-MAY-1997 18:04:55.98
Trace File                              Output File                      
-----------+----+-----+<--------Packet-------->+------------------------------
    Time   |Evnt|Data |Chn Q Type     P    P   |Data                         
hh mm ss cc|    |Size |    M         R/S  R/S  |                              
-----------+----+-----+<---------------------->+------------------------------
18:04:58.06|  Tx|    5|000   RSTRT C=07 D=00   |
18:04:58.09|Rx  |    3|000   RSTRC             |
18:04:58.54|Rx  |   11|032   CALL              |Called DTE 678901234511
                      ||
18:05:00.42|  Tx|    5|032   CALLC             |
18:05:00.73|Rx  |   11|031   CALL              |Called DTE 678901234512
                      ||
18:05:01.99|  Tx|    5|031   CALLC             |
18:05:02.30|Rx  |   11|030   CALL              |Called DTE 678901234503
                      ||
18:05:03.79|  Tx|    5|030   CALLC             |
18:05:04.10|Rx  |   11|02F   CALL              |Called DTE 678901234504
                      ||
18:05:05.44|  Tx|    5|02F   CALLC             |
18:05:05.76|Rx  |   11|02E   CALL              |Called DTE 678901234505
                      ||
18:05:07.10|  Tx|    5|02E   CALLC             |
18:05:07.42|Rx  |   11|02D   CALL              |Called DTE 678901234506
                      ||
18:05:08.46|  Tx|    5|02D   CALLC             |
18:05:08.78|Rx  |   11|02C   CALL              |Called DTE 678901234507
                      ||
18:05:10.21|  Tx|    5|02C   CALLC             |
18:05:10.54|Rx  |   11|02B   CALL              |Called DTE 678901234508
                      ||
18:05:11.71|  Tx|    5|02B   CALLC             |
18:05:12.05|Rx  |   11|02A   CALL              |Called DTE 678901234509
                      ||
18:05:13.15|  Tx|    5|02A   CALLC             |
18:05:13.48|Rx  |   11|029   CALL              |Called DTE 678901234510
                      ||
18:05:14.67|  Tx|    5|029   CALLC             |
18:05:15.01|Rx  |   11|028   CALL              |Called DTE 678901234516
                      ||
18:05:16.31|  Tx|    5|028   CALLC             |
18:05:16.66|Rx  |   11|027   CALL              |Called DTE 678901234517
                      ||
18:05:17.69|  Tx|    5|027   CALLC             |
18:05:18.05|Rx  |   11|026   CALL              |Called DTE 678901234518
                      ||
18:05:19.07|  Tx|    5|026   CALLC             |
18:05:19.42|Rx  |   11|025   CALL              |Called DTE 678901234519
                      ||
18:05:20.68|  Tx|    5|025   CALLC             |
18:05:21.04|Rx  |   11|024   CALL              |Called DTE 678901234511
                      ||
18:05:22.39|  Tx|    5|024   CALLC             |
18:05:22.75|Rx  |   11|023   CALL              |Called DTE 678901234406 <==
                      ||
18:05:22.82|  Tx|    5|023   CLR   C=00 D=00   |
18:05:22.84|Rx  |    3|023   CLRC              |
18:05:23.19|Rx  |   11|023   CALL              |Called DTE 678901234407 <==
                      ||
18:05:23.26|  Tx|    5|023   CLR   C=00 D=00   |
18:05:23.28|Rx  |    3|023   CLRC              |
18:05:23.63|Rx  |   11|023   CALL              |Called DTE 678901234548
                      ||
18:05:25.29|  Tx|    5|023   CALLC             |
18:05:25.66|Rx  |   11|022   CALL              |Called DTE 678901234409 <==
                      ||
18:05:25.74|  Tx|    5|022   CLR   C=00 D=00   |
18:05:25.76|Rx  |    3|022   CLRC              |
18:05:26.11|Rx  |   11|022   CALL              |Called DTE 678901234410 <==
                      ||
18:05:26.19|  Tx|    5|022   CLR   C=00 D=00   |
18:05:26.21|Rx  |    3|022   CLRC              |
18:05:26.57|Rx  |   11|022   CALL              |Called DTE 678901234516
                      ||
18:05:28.07|  Tx|    5|022   CALLC             |
18:05:28.45|Rx  |   11|021   CALL              |Called DTE 678901234517
                      ||
18:05:29.44|  Tx|    5|021   CALLC             |
18:05:29.83|Rx  |   11|020   CALL              |Called DTE 678901234518
                      ||
18:05:31.14|  Tx|    5|020   CALLC             |
18:05:31.53|Rx  |   11|01F   CALL              |Called DTE 678901234519
                      ||
18:05:32.92|  Tx|    5|01F   CALLC             |
18:05:33.32|Rx  |   11|01E   CALL              |Called DTE 678901234511
                      ||
18:05:34.44|  Tx|    5|01E   CALLC             |
18:05:34.85|Rx  |   11|01D   CALL              |Called DTE 678901234526
                      ||
18:05:36.40|  Tx|    5|01D   CALLC             |
18:05:36.81|Rx  |   11|01C   CALL              |Called DTE 678901234527
                      ||
18:05:37.94|  Tx|    5|01C   CALLC             |
18:05:38.35|Rx  |   11|01B   CALL              |Called DTE 678901234528
                      ||
18:05:39.54|  Tx|    5|01B   CALLC             |
18:05:39.96|Rx  |   11|01A   CALL              |Called DTE 678901234529
                      ||
18:05:41.31|  Tx|    5|01A   CALLC             |
18:05:41.73|Rx  |   11|019   CALL              |Called DTE 678901234520
                      ||
18:05:43.19|  Tx|    5|019   CALLC             |
18:05:43.62|Rx  |   11|018   CALL              |Called DTE 546000000000 <==
                      ||
18:05:43.74|  Tx|    5|018   CLR   C=00 D=00   |
18:05:43.75|Rx  |    3|018   CLRC              |
18:05:44.16|Rx  |   11|018   CALL              |Called DTE 000000000000 <==
                      ||
18:05:44.28|  Tx|    5|018   CLR   C=00 D=00   |
18:05:44.29|Rx  |    3|018   CLRC              |
18:05:44.71|Rx  |   11|018   CALL              |Called DTE 000000000000 <==
                      ||
18:05:45.12|  Tx|    5|018   CLR   C=00 D=00   |
18:05:45.14|Rx  |    3|018   CLRC              |
18:05:45.56|Rx  |   11|018   CALL              |Called DTE 000000000000 <==
                      ||
18:05:45.92|  Tx|    5|018   CLR   C=00 D=00   |
18:05:45.94|Rx  |    3|018   CLRC              |
18:05:46.36|Rx  |   11|018   CALL              |Called DTE 000000000000 <==
                      ||
18:05:46.71|  Tx|    5|018   CLR   C=00 D=00   |
18:05:46.73|Rx  |    3|018   CLRC              |
18:05:47.16|Rx  |   11|018   CALL              |Called DTE 000000000000 <==
                      ||
18:05:47.52|  Tx|    5|018   CLR   C=00 D=00   |
18:05:47.54|Rx  |    3|018   CLRC              |
18:05:47.97|Rx  |   11|018   CALL              |Called DTE 000000000000 <==
                      ||
18:05:48.32|  Tx|    5|018   CLR   C=00 D=00   |
18:05:48.34|Rx  |    3|018   CLRC              |
18:05:48.78|Rx  |   11|018   CALL              |Called DTE 000000000000 <==

2. OPCOM log
   =========

%%%%%%%%%%%  OPCOM  15-MAY-1997 18:05:21.35  %%%%%%%%%%%
Message from user SYSTEM on V7610
Event: Incoming Call Failed from: Node 0:. X25 Access,
        at: 1997-05-16-04:05:22.820+10:00Iinf
        Sending DTE=, 
        Reason=No Matching Filters, 
        Security DTE Class=, 
        Security Filter=, 
        Group=
        eventUid   CCEFFC40-CD4D-11D0-96C8-08002BBA86B5
        entityUid  62BD5B40-CB0B-11D0-96C8-08002BBA86B5
        streamUid  637F24A0-CB0B-11D0-96C8-08002BBA86B5

%%%%%%%%%%%  OPCOM  15-MAY-1997 18:05:21.78  %%%%%%%%%%%
Message from user SYSTEM on V7610
Event: Port Terminated from: Node 0:. X25 Access,
        at: 1997-05-16-04:05:23.150+10:00Iinf
        Client=, 
        Remote Port=, 
        Type=Switched, 
        State=Calling, 
        Reserved="", 
        Call Direction=Incoming, 
        Call Association=, 
        Target DTE Address=678901234406, <==============================
        Calling DTE Address=, 
        Protocol Identifier='00000000'H, 
        Group=, 
        Channel=35, 
        DTE Class=SECOND, 
        Outgoing Packet Size=128, 
        Incoming Packet Size=128, 
        Outgoing Window Size=2, 
        Incoming Window Size=2, 
        Outgoing Throughput Class=0, 
        Incoming Throughput Class=0, 
        Reverse Charging=False, 
        Redirect Reason=Not Redirected,

%%%%%%%%%%%  OPCOM  15-MAY-1997 18:05:21.78  %%%%%%%%%%%
Message from user SYSTEM on V7610
        Originally Called Address=, 
        Fast Select=No Fast Select, 
        Calling Address Extension=, 
        Target Address Extension=, 
        DTE=X25 Protocol DTE dte-1, 
        Reference Time=1997-05-16-04:05:22.760+10:00Iinf, 
        Data Octets Received=0, 
        Data Octets Sent=0, 
        PDUs Received=0, 
        PDUs Sent=0, 
        Segments Sent=0, 
        Segments Received=0
        eventUid   CD2256E0-CD4D-11D0-96C8-08002BBA86B5
        entityUid  62BD5B40-CB0B-11D0-96C8-08002BBA86B5
        streamUid  637F24A0-CB0B-11D0-96C8-08002BBA86B5

%%%%%%%%%%%  OPCOM  15-MAY-1997 18:05:21.79  %%%%%%%%%%%
Message from user SYSTEM on V7610
Event: Incoming Call Failed from: Node 0:. X25 Access,
        at: 1997-05-16-04:05:23.260+10:00Iinf
        Sending DTE=, 
        Reason=No Matching Filters, 
        Security DTE Class=, 
        Security Filter=, 
        Group=
        eventUid   CD331FC0-CD4D-11D0-96C8-08002BBA86B5
        entityUid  62BD5B40-CB0B-11D0-96C8-08002BBA86B5
        streamUid  637F24A0-CB0B-11D0-96C8-08002BBA86B5

%%%%%%%%%%%  OPCOM  15-MAY-1997 18:05:22.11  %%%%%%%%%%%
Message from user SYSTEM on V7610
Event: Port Terminated from: Node 0:. X25 Access,
        at: 1997-05-16-04:05:23.590+10:00Iinf
        Client=, 
        Remote Port=, 
        Type=Switched, 
        State=Calling, 
        Reserved="", 
        Call Direction=Incoming, 
        Call Association=, 
        Target DTE Address=678901234407, <==========================
        Calling DTE Address=, 
        Protocol Identifier='00000000'H, 
        Group=, 
        Channel=35, 
        DTE Class=SECOND, 
        Outgoing Packet Size=128, 
        Incoming Packet Size=128, 
        Outgoing Window Size=2, 
        Incoming Window Size=2, 
        Outgoing Throughput Class=0, 
        Incoming Throughput Class=0, 
        Reverse Charging=False, 
        Redirect Reason=Not Redirected,

%%%%%%%%%%%  OPCOM  15-MAY-1997 18:05:22.16  %%%%%%%%%%%
Message from user SYSTEM on V7610
        Originally Called Address=, 
        Fast Select=No Fast Select, 
        Calling Address Extension=, 
        Target Address Extension=, 
        DTE=X25 Protocol DTE dte-1, 
        Reference Time=1997-05-16-04:05:23.200+10:00Iinf, 
        Data Octets Received=0, 
        Data Octets Sent=0, 
        PDUs Received=0, 
        PDUs Sent=0, 
        Segments Sent=0, 
        Segments Received=0
        eventUid   CD657A60-CD4D-11D0-96C8-08002BBA86B5
        entityUid  62BD5B40-CB0B-11D0-96C8-08002BBA86B5
        streamUid  637F24A0-CB0B-11D0-96C8-08002BBA86B5

%%%%%%%%%%%  OPCOM  15-MAY-1997 18:05:24.35  %%%%%%%%%%%
Message from user SYSTEM on V7610
Event: Incoming Call Failed from: Node 0:. X25 Access,
        at: 1997-05-16-04:05:25.740+10:00Iinf
        Sending DTE=, 
        Reason=No Matching Filters, 
        Security DTE Class=, 
        Security Filter=, 
        Group=
        eventUid   CEAD8AC0-CD4D-11D0-96C8-08002BBA86B5
        entityUid  62BD5B40-CB0B-11D0-96C8-08002BBA86B5
        streamUid  637F24A0-CB0B-11D0-96C8-08002BBA86B5

%%%%%%%%%%%  OPCOM  15-MAY-1997 18:05:24.72  %%%%%%%%%%%
Message from user SYSTEM on V7610
Event: Port Terminated from: Node 0:. X25 Access,
        at: 1997-05-16-04:05:26.070+10:00Iinf
        Client=, 
        Remote Port=, 
        Type=Switched, 
        State=Calling, 
        Reserved="", 
        Call Direction=Incoming, 
        Call Association=, 
        Target DTE Address=678901234409, <===========================
        Calling DTE Address=, 
        Protocol Identifier='00000000'H, 
        Group=, 
        Channel=34, 
        DTE Class=SECOND, 
        Outgoing Packet Size=128, 
        Incoming Packet Size=128, 
        Outgoing Window Size=2, 
        Incoming Window Size=2, 
        Outgoing Throughput Class=0, 
        Incoming Throughput Class=0, 
        Reverse Charging=False, 
        Redirect Reason=Not Redirected,

%%%%%%%%%%%  OPCOM  15-MAY-1997 18:05:24.73  %%%%%%%%%%%
Message from user SYSTEM on V7610
        Originally Called Address=, 
        Fast Select=No Fast Select, 
        Calling Address Extension=, 
        Target Address Extension=, 
        DTE=X25 Protocol DTE dte-1, 
        Reference Time=1997-05-16-04:05:25.680+10:00Iinf, 
        Data Octets Received=0, 
        Data Octets Sent=0, 
        PDUs Received=0, 
        PDUs Sent=0, 
        Segments Sent=0, 
        Segments Received=0
        eventUid   CEDFE560-CD4D-11D0-96C8-08002BBA86B5
        entityUid  62BD5B40-CB0B-11D0-96C8-08002BBA86B5
        streamUid  637F24A0-CB0B-11D0-96C8-08002BBA86B5

%%%%%%%%%%%  OPCOM  15-MAY-1997 18:05:24.73  %%%%%%%%%%%
Message from user SYSTEM on V7610
Event: Incoming Call Failed from: Node 0:. X25 Access,
        at: 1997-05-16-04:05:26.190+10:00Iinf
        Sending DTE=, 
        Reason=No Matching Filters, 
        Security DTE Class=, 
        Security Filter=, 
        Group=
        eventUid   CEF234E0-CD4D-11D0-96C8-08002BBA86B5
        entityUid  62BD5B40-CB0B-11D0-96C8-08002BBA86B5
        streamUid  637F24A0-CB0B-11D0-96C8-08002BBA86B5

%%%%%%%%%%%  OPCOM  15-MAY-1997 18:05:25.05  %%%%%%%%%%%
Message from user SYSTEM on V7610
Event: Port Terminated from: Node 0:. X25 Access,
        at: 1997-05-16-04:05:26.520+10:00Iinf
        Client=, 
        Remote Port=, 
        Type=Switched, 
        State=Calling, 
        Reserved="", 
        Call Direction=Incoming, 
        Call Association=, 
        Target DTE Address=678901234410, <==========================
        Calling DTE Address=, 
        Protocol Identifier='00000000'H, 
        Group=, 
        Channel=34, 
        DTE Class=SECOND, 
        Outgoing Packet Size=128, 
        Incoming Packet Size=128, 
        Outgoing Window Size=2, 
        Incoming Window Size=2, 
        Outgoing Throughput Class=0, 
        Incoming Throughput Class=0, 
        Reverse Charging=False, 
        Redirect Reason=Not Redirected,

%%%%%%%%%%%  OPCOM  15-MAY-1997 18:05:25.08  %%%%%%%%%%%
Message from user SYSTEM on V7610
        Originally Called Address=, 
        Fast Select=No Fast Select, 
        Calling Address Extension=, 
        Target Address Extension=, 
        DTE=X25 Protocol DTE dte-1, 
        Reference Time=1997-05-16-04:05:26.120+10:00Iinf, 
        Data Octets Received=0, 
        Data Octets Sent=0, 
        PDUs Received=0, 
        PDUs Sent=0, 
        Segments Sent=0, 
        Segments Received=0
        eventUid   CF248F80-CD4D-11D0-96C8-08002BBA86B5
        entityUid  62BD5B40-CB0B-11D0-96C8-08002BBA86B5
        streamUid  637F24A0-CB0B-11D0-96C8-08002BBA86B5


%%%%%%%%%%%  OPCOM  15-MAY-1997 18:05:41.38  %%%%%%%%%%%
Message from user SYSTEM on V7610
Event: Incoming Call Failed from: Node 0:. X25 Access,
        at: 1997-05-16-04:05:43.730+10:00Iinf
        Sending DTE=, 
        Reason=No Matching Filters, 
        Security DTE Class=, 
        Security Filter=, 
        Group=
        eventUid   D9669920-CD4D-11D0-96C8-08002BBA86B5
        entityUid  62BD5B40-CB0B-11D0-96C8-08002BBA86B5
        streamUid  637F24A0-CB0B-11D0-96C8-08002BBA86B5

%%%%%%%%%%%  OPCOM  15-MAY-1997 18:05:42.64  %%%%%%%%%%%
Message from user SYSTEM on V7610
Event: Port Terminated from: Node 0:. X25 Access,
        at: 1997-05-16-04:05:44.090+10:00Iinf
        Client=, 
        Remote Port=, 
        Type=Switched, 
        State=Calling, 
        Reserved="", 
        Call Direction=Incoming, 
        Call Association=, 
        Target DTE Address=546000000000, <=========================
        Calling DTE Address=, 
        Protocol Identifier='00000000'H, 
        Group=, 
        Channel=24, 
        DTE Class=SECOND, 
        Outgoing Packet Size=128, 
        Incoming Packet Size=128, 
        Outgoing Window Size=2, 
        Incoming Window Size=2, 
        Outgoing Throughput Class=0, 
        Incoming Throughput Class=0, 
        Reverse Charging=False, 
        Redirect Reason=Not Redirected,

%%%%%%%%%%%  OPCOM  15-MAY-1997 18:05:42.65  %%%%%%%%%%%
Message from user SYSTEM on V7610
        Originally Called Address=, 
        Fast Select=No Fast Select, 
        Calling Address Extension=, 
        Target Address Extension=, 
        DTE=X25 Protocol DTE dte-1, 
        Reference Time=1997-05-16-04:05:43.640+10:00Iinf, 
        Data Octets Received=0, 
        Data Octets Sent=0, 
        PDUs Received=0, 
        PDUs Sent=0, 
        Segments Sent=0, 
        Segments Received=0
        eventUid   D99D87A0-CD4D-11D0-96C8-08002BBA86B5
        entityUid  62BD5B40-CB0B-11D0-96C8-08002BBA86B5
        streamUid  637F24A0-CB0B-11D0-96C8-08002BBA86B5

        streamUid  637F24A0-CB0B-11D0-96C8-08002BBA86B5


%%%%%%%%%%%  OPCOM  15-MAY-1997 18:05:53.96  %%%%%%%%%%%
Message from user SYSTEM on V7610
Event: Incoming Call Failed from: Node 0:. X25 Access,
        at: 1997-05-16-04:05:55.520+10:00Iinf
        Sending DTE=, 
        Reason=No Matching Filters, 
        Security DTE Class=, 
        Security Filter=, 
        Group=
        eventUid   E06D9C00-CD4D-11D0-96C8-08002BBA86B5
        entityUid  62BD5B40-CB0B-11D0-96C8-08002BBA86B5
        streamUid  637F24A0-CB0B-11D0-96C8-08002BBA86B5

%%%%%%%%%%%  OPCOM  15-MAY-1997 18:05:54.64  %%%%%%%%%%%
Message from user SYSTEM on V7610
Event: Port Terminated from: Node 0:. X25 Access,
        at: 1997-05-16-04:05:55.870+10:00Iinf
        Client=, 
        Remote Port=, 
        Type=Switched, 
        State=Calling, 
        Reserved="", 
        Call Direction=Incoming, 
        Call Association=, 
        Target DTE Address=000000000000, <=========================
        Calling DTE Address=, 
        Protocol Identifier='00000000'H, 
        Group=, 
        Channel=24, 
        DTE Class=SECOND, 
        Outgoing Packet Size=128, 
        Incoming Packet Size=128, 
        Outgoing Window Size=2, 
        Incoming Window Size=2, 
        Outgoing Throughput Class=0, 
        Incoming Throughput Class=0, 
        Reverse Charging=False, 
        Redirect Reason=Not Redirected,

%%%%%%%%%%%  OPCOM  15-MAY-1997 18:05:54.65  %%%%%%%%%%%
Message from user SYSTEM on V7610
        Originally Called Address=, 
        Fast Select=No Fast Select, 
        Calling Address Extension=, 
        Target Address Extension=, 
        DTE=X25 Protocol DTE dte-1, 
        Reference Time=1997-05-16-04:05:55.420+10:00Iinf, 
        Data Octets Received=0, 
        Data Octets Sent=0, 
        PDUs Received=0, 
        PDUs Sent=0, 
        Segments Sent=0, 
        Segments Received=0
        eventUid   E0A303E0-CD4D-11D0-96C8-08002BBA86B5
        entityUid  62BD5B40-CB0B-11D0-96C8-08002BBA86B5
        streamUid  637F24A0-CB0B-11D0-96C8-08002BBA86B5

3. PSI$CONFIGURE.NCL
   =================

create x25 access
create x25 access security dte class default
create x25 protocol
!
!
! Create and set up the DTE CLASSES
!
! Always 'type remote' for this section
!
!
create x25 access dte class  LONGNT type remote  ,profile - 
"ISO8208"
set x25 access dte class  LONGNT node LOCAL:.X25GW3 
create x25 access dte class  LOCTEST type remote  ,profile - 
"ISO8208"
set x25 access dte class  LOCTEST node LOCAL:.X25GW3 
create x25 access dte class  ISO8208 type remote  ,profile - 
"ISO8208"
set x25 access dte class  ISO8208 node LOCAL:.X25GWY 
create x25 access dte class  SECOND type remote  ,profile - 
"ISO8208"
set x25 access dte class  SECOND node LOCAL:.X25PVC 
create x25 access dte class  DOOSAN type remote  ,profile - 
"DACOMNET"
set x25 access dte class  DOOSAN node LOCAL:.X25PVC 
create x25 access dte class  SNSNET type remote  ,profile - 
"ISO8208"
set x25 access dte class  SNSNET node LOCAL:.X25GW2 
create x25 access dte class  KCSNET type remote  ,profile - 
"ISO8208"
set x25 access dte class  KCSNET node LOCAL:.X25GW2 
create x25 access dte class  ATENET type remote  ,profile - 
"ISO8208"
set x25 access dte class  ATENET node LOCAL:.X25GW2 
create x25 access dte class  NICENET type remote  ,profile - 
"ISO8208"
set x25 access dte class  NICENET node LOCAL:.X25GW2 
create x25 access dte class  KSNET type remote  ,profile - 
"ISO8208"
set x25 access dte class  KSNET node LOCAL:.X25GW3 
!
!
! Create and set templates
!
!
create x25 access template default 
!
!
! Create and set up X25 Access FILTERS
!
!
create x25 access filter X29_SERVER 
set x25 access filter X29_SERVER priority 1127 ,  call data value %X01 -
    ,  call data mask %XFF 
create x25 access filter X29_LOGIN 
set x25 access filter X29_LOGIN priority 2000 ,  call data value %X01 -
    ,  call data mask %XFF 
create x25 access filter PSI_MAIL 
set x25 access filter PSI_MAIL priority 3000 ,  -
    call data value %XFF00000056332E30204D41494C2D3131 ,  -
    call data mask %XFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 
create x25 access filter APPLENET_DACOM 
set x25 access filter APPLENET_DACOM priority 2002 ,  -
    subaddress range [[1..12]] ,  inbound dte class ISO8208 
create x25 access filter PB_X25_SVC 
set x25 access filter PB_X25_SVC priority 2003 ,  -
    subaddress range [[1..50]] ,  inbound dte class SECOND 
create x25 access filter HINET-P 
set x25 access filter HINET-P priority 2004 ,  -
    incoming dte address 2511257 ,  inbound dte class SECOND 
 
!
!
! Create applications
! 
!
create x25 access application X29_LOGIN 
set x25 access application X29_LOGIN type X29 login,  filters -
     (X29_LOGIN) 
create x25 access application PSI_MAIL 
set x25 access application PSI_MAIL type X25,  file sys$system:psi$mail.com ,  user "SYSTEM",  filters -
     (PSI_MAIL) 
create x25 access application APPLENET_DACOM 
set x25 access application APPLENET_DACOM type X25,  file APPLENET_DACOM.COM ,  user "APPLENET",  filters -
     (APPLENET_DACOM) 
create x25 access application PB_X25_SVC 
set x25 access application PB_X25_SVC type X25,  file PB_X25_SVC.COM ,  user "APPLENET",  filters -
     (PB_X25_SVC) 
create x25 access application HINET-P 
set x25 access application HINET-P type X29,  file HINETP.COM ,  user "APPLENET",  filters -
     (HINET-P) 
 
!
!
! Create Security filters
! 
!
create x25 access security filter DEFAULT 
set x25 access security filter DEFAULT acl ((identifier =( * -
    ), access = ALL)) 
 
!
!
! Create Remote DTEs
! 
!
create x25 access security dte class default remote dte MATCHALL -
    remote address prefix * 
set x25 access security dte class default remote dte MATCHALL rights identifiers -
     (PSI$OPEN_SECURITY) 
set x25 access security dte class default remote dte MATCHALL -
    acl ((identifier = ( * ), access = ALL))
 
!
!
! Create x25 client
! 
!
create x25 client
!
!
! Execute the user-supplied file of NCL commands before
! enabling anything.
!
 
!
!
! Enable x25 access
! 
!
enable x25 access
!
!
! Enable the applications
!
!
enable x25 access application X29_LOGIN 
enable x25 access application PSI_MAIL 
enable x25 access application APPLENET_DACOM 
enable x25 access application PB_X25_SVC 
enable x25 access application HINET-P 

3. X25_GWY_X25PVC.NCL
   ==================

$ image_verify = f$environment("verify_image")
$ set verify=image
$ on error then goto exit
$ Define/User/Nolog Ncl$Environment Private
$ Define/User/Nolog Ncl$Globalsection Sys$Share:Nis$Globalsection.Dat
$run sys$system:x25$gwy_script_compile.exe 
set ncl default entity node x
set output abort on error true
set output destination  sys$common:[mom$system]x25_gwy_X25PVC.cmip 
open output
enable output
!
!
! 
!
! Node:  LOCAL:.X25PVC 
! MOP Client Name:  X25PVC 
! Hardware Type:  X25gateway-500 
! Hardware Address:  08-00-2B-BA-86-B5 
!
!
!
!		X25 GATEWAY CONFIGURATION SCRIPT
!		================================
!
!	This NCL script has been produced by the following utility:	sys$system:x25$gwy_gateway_config.exe V1.0
!
!	This script was produced on:	Fri Feb 21 19:10:22 1997 
!
!	To use this script on an X25 GATEWAY system, the script
!	must be processed by the CMIP utility.
!
!
!	Set up the node entity
!	----------------------
!
!
enable function address watch
!
!
!	Create standard modules and entities
! 
!
create x25 access
create x25 protocol
create x25 server
create modem connect
create lapb
create x25 access security dte class default
!
!
! The tower set for the DEC X25gateway
!
! { 
!    { 
!         {%X0013}, 
!         {DNA$ProtID$SessCtlV3 Number = 19 }, 
!         {dna$protid$nsp}, 
!         {DNA$RoutingV3  49::00-01:AA-00-04-00-2D-05:20  } 
!    }  
! }
!
!
!	Set up Routing
!	--------------
!
!
create routing type endnode
set routing phaseiv address 1.301 
set routing phaseiv prefix 49:: 
enable routing
!
!	Set up NSP
!	----------
!
!
create nsp
enable nsp
!
!
!	Set up CSMACD circuit
!	---------------------
!
!
create routing circuit csmacd-0 type csma-cd
set routing circuit csmacd-0 data link entity csma-cd station csmacd-0
enable routing circuit csmacd-0
!
! 
!
! Create the Event Dispatcher
!
create event dispatcher
!
! Create and set up the Event Stream:  EVENT_X25PVC 
!
create event dispatcher outbound stream EVENT_X25PVC 
set event dispatcher outbound stream EVENT_X25PVC sink address  -
    {  -
     { {%X0113}, {DNA$ProtID$SessCtlV2 Number = 82 },{dna$protid$nsp},  -
     {DNA$ProtID$RoutingV3  49::00-01:AA-00-04-00-01-04:20 } }   -
    }
!
!
! Create and set Line:  syn-0-0 
! to use device: syn-0-0 
!
create modem connect line syn-0-0 communication port syn-0-0 -
    , profile  "NORMAL"
set modem connect line syn-0-0 -
    modem control full, speed 9600 , suppress test indicator true
!
! Create and set Line:  syn-0-1 
! to use device: syn-0-1 
!
create modem connect line syn-0-1 communication port syn-0-1 -
    , profile  "NORMAL"
set modem connect line syn-0-1 -
    modem control full, speed 19200 , suppress test indicator true
!
! Create and set Line:  syn-0-2 
! to use device: syn-0-2 
!
create modem connect line syn-0-2 communication port syn-0-2 -
    , profile  "NORMAL"
set modem connect line syn-0-2 -
    modem control full, speed 64000 , suppress test indicator true
!
! Create and set Line:  syn-0-3 
! to use device: syn-0-3 
!
create modem connect line syn-0-3 communication port syn-0-3 -
    , profile  "NORMAL"
set modem connect line syn-0-3 -
    modem control full, speed 9600 , suppress test indicator true
!
! Create and set DTE:  dte-0 
! and LAPB link:  dte-0 
! using Line:  syn-0-0 
!
create lapb link dte-0 profile  "ISO8208"
set lapb link dte-0 physical line modem connect line syn-0-0 ,  -
    acknowledge timer 2720 ,  holdback timer 1350 ,  maximum data size 1031 -
    ,  window size 7 
!
!
! Create and set DTE:  dte-0 
! using Line:  syn-0-0 
!
!
create x25 protocol dte dte-0 profile  "ISO8208"
set x25 protocol dte dte-0 link service provider lapb link dte-0 ,  -
    inbound dte class SECOND ,  x25 address 5678901234 ,  -
    outgoing list  [[7..10]] ,  minimum packet size 16 ,  -
    maximum packet size 1024 ,  default packet size 128 ,  -
    minimum window size 1 ,  maximum window size 7 ,  default window size 2 
!
! Create and set DTE:  dte-1 
! and LAPB link:  dte-1 
! using Line:  syn-0-1 
!
create lapb link dte-1 profile  "ISO8208"
set lapb link dte-1 physical line modem connect line syn-0-1 ,  -
    interface type dce,  acknowledge timer 2000 ,  holdback timer 1000 ,  -
    maximum data size 262 ,  window size 7 
!
! Create and set DTE:  dte-1 
! using Line:  syn-0-1 
!
create x25 protocol dte dte-1 profile  "ISO8208"
set x25 protocol dte dte-1 link service provider lapb link dte-1 ,  -
    inbound dte class SECOND ,  x25 address 6789012345 ,  -
    interface type dce,  outgoing list  [[1..50]] ,  -
    minimum packet size 128 ,  maximum packet size 128 ,  -
    default packet size 128 ,  minimum window size 2 ,  -
    maximum window size 2 ,  default window size 2 
!
! Create and set DTE:  dte-2 
! and LAPB link:  dte-2 
! using Line:  syn-0-2 
!
create lapb link dte-2 profile  "ISO8208"
set lapb link dte-2 physical line modem connect line syn-0-2 ,  -
    acknowledge timer 2000 ,  holdback timer 1000 ,  maximum data size 262 -
    ,  window size 7 
!
! Create and set DTE:  dte-2 
! using Line:  syn-0-2 
!
create x25 protocol dte dte-2 profile  "ISO8208"
set x25 protocol dte dte-2 link service provider lapb link dte-2 ,  -
    inbound dte class SECOND ,  x25 address 2511257 ,  -
    outgoing list  [[1..32]] ,  minimum packet size 128 ,  -
    maximum packet size 128 ,  default packet size 128 ,  -
    minimum window size 2 ,  maximum window size 2 ,  default window size 2 
!
! Create and set DTE:  dte-3 
! and LAPB link:  dte-3 
! using Line:  syn-0-3 
!
create lapb link dte-3 profile  "DACOMNET"
set lapb link dte-3 physical line modem connect line syn-0-3 ,  -
    acknowledge timer 2000 ,  holdback timer 1000 ,  maximum data size 261 -
    ,  window size 7 
!
! Create and set DTE:  dte-3 
! using Line:  syn-0-3 
!
create x25 protocol dte dte-3 profile  "DACOMNET"
set x25 protocol dte dte-3 link service provider lapb link dte-3 ,  -
    inbound dte class DOOSAN ,  x25 address 122510650 ,  -
    outgoing list  [[5..8]] ,  minimum packet size 128 ,  -
    maximum packet size 256 ,  default packet size 128 ,  -
    minimum window size 2 ,  maximum window size 2 ,  default window size 2 
!
! Create Local DTE Class: SECOND 
!
create x25 access dte class SECOND type local
set x25 access dte class SECOND local dtes -
     (dte-2,dte-1,dte-0) 
!
! Create Local DTE Class: dte-0 
!
create x25 access dte class dte-0 type local
set x25 access dte class dte-0 local dtes -
     (dte-0) 
!
! Create Local DTE Class: dte-1 
!
create x25 access dte class dte-1 type local
set x25 access dte class dte-1 local dtes -
     (dte-1) 
!
! Create Local DTE Class: dte-2 
!
create x25 access dte class dte-2 type local
set x25 access dte class dte-2 local dtes -
     (dte-2) 
!
! Create Local DTE Class: DOOSAN 
!
create x25 access dte class DOOSAN type local
set x25 access dte class DOOSAN local dtes -
     (dte-3) 
!
! Create Local DTE Class: dte-3 
!
create x25 access dte class dte-3 type local
set x25 access dte class dte-3 local dtes -
     (dte-3) 
!
!
! Create and set PVCs
!
!
create x25 protocol dte  dte-0  pvc  PVC-1 channel 1  , window size 7 -
     , packet size 1024 
set x25 protocol dte dte-0  pvc  PVC-1 acl (( identifier=( * -
    ), access = ALL))
create x25 protocol dte  dte-0  pvc  PVC-2 channel 2  , window size 7 -
     , packet size 1024 
set x25 protocol dte dte-0  pvc  PVC-2 acl (( identifier=( * -
    ), access = ALL))
create x25 protocol dte  dte-0  pvc  PVC-3 channel 3  , window size 7 -
     , packet size 1024 
set x25 protocol dte dte-0  pvc  PVC-3 acl (( identifier=( * -
    ), access = ALL))
create x25 protocol dte  dte-0  pvc  PVC-4 channel 4  , window size 7 -
     , packet size 1024 
set x25 protocol dte dte-0  pvc  PVC-4 acl (( identifier=( * -
    ), access = ALL))
create x25 protocol dte  dte-3  pvc  DCPVC-1 channel 1  , window size 2 -
     , packet size 128 
set x25 protocol dte dte-3  pvc  DCPVC-1 acl (( identifier=( * -
    ), access = ALL))
create x25 protocol dte  dte-3  pvc  DCPVC-2 channel 2  , window size 2 -
     , packet size 128 
set x25 protocol dte dte-3  pvc  DCPVC-2 acl (( identifier=( * -
    ), access = ALL))
create x25 protocol dte  dte-3  pvc  TYPVC-1 channel 3  , window size 2 -
     , packet size 128 
set x25 protocol dte dte-3  pvc  TYPVC-1 acl (( identifier=( * -
    ), access = ALL))
create x25 protocol dte  dte-3  pvc  TYPVC-2 channel 4  , window size 2 -
     , packet size 128 
set x25 protocol dte dte-3  pvc  TYPVC-2 acl (( identifier=( * -
    ), access = ALL))
create x25 protocol dte  dte-0  pvc  PVC-5 channel 5  , window size 7 -
     , packet size 1024 
set x25 protocol dte dte-0  pvc  PVC-5 acl (( identifier=( * -
    ), access = ALL))
create x25 protocol dte  dte-0  pvc  PVC-6 channel 6  , window size 7 -
     , packet size 1024 
set x25 protocol dte dte-0  pvc  PVC-6 acl (( identifier=( * -
    ), access = ALL))
!
!
! Create and set up X25 Access FILTERS
!
!
create x25 access filter CLIENT_0 
set x25 access filter CLIENT_0 priority 1 ,  subaddress range [[7..10]] -
    ,  inbound dte class SECOND ,  receiving dte address 5678901234 
create x25 access filter CLIENT_1 
set x25 access filter CLIENT_1 priority 3 ,  -
    receiving dte address 2511257 
create x25 access filter CLIENT_2 
set x25 access filter CLIENT_2 priority 4 ,  -
    receiving dte address 122510650 
create x25 access filter CLIENT_0-1 
set x25 access filter CLIENT_0-1 priority 1 ,  -
    subaddress range [[1..50]] ,  inbound dte class SECOND ,  -
    receiving dte address 6789012345 
!
!
! Create and set up CLIENTS
!
!
create x25 server client CLIENT_0 
set x25 server client CLIENT_0 filters -
     (CLIENT_0-1,CLIENT_0) ,  node V7610 
create x25 server client CLIENT_1 
set x25 server client CLIENT_1 filters -
     (CLIENT_1) ,  node V7610
create x25 server client CLIENT_2 
set x25 server client CLIENT_2 filters -
     (CLIENT_2) ,  node V7610
!
!
! Create Security filters
!
!
!
create x25 access security filter DEFAULT 
set x25 access security filter DEFAULT acl ((identifier =( * -
    ), access = ALL))
!
!
! Create Remote DTEs
!
!
create x25 access security dte class default remote dte match_all -
    remote address prefix * 
set x25 access security dte class default remote dte match_all rights identifiers -
     (PSI$OPEN_SECURITY) 
set x25 access security dte class default remote dte match_all -
    acl ((identifier = ( * ), access = ALL))
!
!
! Create Security Nodes
!
!
!
create x25 server security nodes CLIENT_0 
set x25 server security nodes CLIENT_0 nodes { V7610 }
set x25 server security nodes CLIENT_0 -
    rights identifiers { PSI$OPEN_SECURITY }
create x25 server security nodes CLIENT_1 
set x25 server security nodes CLIENT_1 nodes { V7610 }
set x25 server security nodes CLIENT_1 -
    rights identifiers { PSI$OPEN_SECURITY }
create x25 server security nodes CLIENT_2 
set x25 server security nodes CLIENT_2 nodes { V7610 }
set x25 server security nodes CLIENT_2 -
    rights identifiers { PSI$OPEN_SECURITY }
create session control known tower V7610 towers  -
    {  -
     {  -
      {%X0113},  -
      {DNA$ProtID$SessCtlV2  Number = 25 },  -
      {dna$protid$nsp},  -
      {DNA$ProtID$RoutingV3  49::00-01:AA-00-04-00-01-04:20  }  -
    }   -
    }
create session control known tower V6320 towers  -
    {  -
     {  -
      {%X0113},  -
      {DNA$ProtID$SessCtlV2  Number = 25 },  -
      {dna$protid$nsp},  -
      {DNA$ProtID$RoutingV3  49::00-01:AA-00-04-00-03-04:20  }  -
    }   -
    }
create session control known tower V777 towers  -
    {  -
     {  -
      {%X0113},  -
      {DNA$ProtID$SessCtlV2  Number = 25 },  -
      {dna$protid$nsp},  -
      {DNA$ProtID$RoutingV3  49::00-01:AA-00-04-00-09-07:20  }  -
    }   -
    }
!
! Execute the file containing the extra create ncl commands
!
do  sys$common:[mom$system]x25_gwy_X25PVC_extra_create.ncl 
!
! Execute the file containing the extra set ncl commands
!
do  sys$common:[mom$system]x25_gwy_X25PVC_extra_set.ncl 
!
!
! Execute the user-supplied file of NCL commands before
! enabling anything.
!
!
!
! Enable x25 access
!
! 
!
enable x25 access
!
!
! Enable x25 server
!
!
!
enable x25 server
!
!
! Enable x25 server clients
!
!
enable x25 server client CLIENT_0 
enable x25 server client CLIENT_1 
enable x25 server client CLIENT_2 
!
! Enable commands related to DTE: dte-0 
!
enable modem connect line syn-0-0 
enable lapb link dte-0 
enable x25 protocol dte dte-0 
!
! Enable commands related to DTE: dte-1 
!
enable modem connect line syn-0-1 
enable lapb link dte-1 
enable x25 protocol dte dte-1 
!
! Enable commands related to DTE: dte-2 
!
enable modem connect line syn-0-2 
enable lapb link dte-2 
enable x25 protocol dte dte-2 
!
! Enable commands related to DTE: dte-3 
!
enable modem connect line syn-0-3 
enable lapb link dte-3 
enable x25 protocol dte dte-3 
!
!
! Enable the event dispatcher
!
!
enable event dispatcher
!
!
! Enable the event streams
!
!
enable event dispatcher outbound stream EVENT_X25PVC 
!
! Execute the file containing the extra enable ncl commands
!
do  sys$common:[mom$system]x25_gwy_X25PVC_extra_enable.ncl 
!
!
$
$exit:
$ status = $status
$ if .not. image_verify then set verify=noimage
$ exit (status)

- End -
3750.3Fix the callers ...MARVIN::CARLINIFri May 16 1997 11:5513
The first rejected call is for DTE address 678901234406. A quick check shows
that the only possible matching filter might have been CLIENT_0-1 but that
specifies a receiving DTE address of 6789012345, which does not match.

So you get the message indicating that there are no matching filters because
there *are* no matching filters!

The working calls are calling the correct addresses, the failing calls are
calling incorrect addresses.

The solution seems fairly clear to me :-)

Antonio
3750.4No one is calling DTE addressDEKVC::SANGHOKIMMon May 19 1997 10:5818
Thanks for your reply.

The UNIX machine is directly connected to DEMSA port via MODEM,
and the caller(application program on UNIX machine) does not use
any DTE address.
I don't know where these 6 incorrect DTE addresses come from.
The 6 incorrect DTE addresses are always as follow;

 678901234406, 678901234407, 678901234409, 678901234410, 546000000000,
 000000000000

Are there no action required in VAX side ?
If possible, would you like to let me know any check point in VAX side
or UNIX side ?

Thanks again.
Sangho Kim
3750.5More research requiredMARVIN::CARLINITue May 20 1997 10:1726
>The 6 incorrect DTE addresses are always as follow;
>
> 678901234406, 678901234407, 678901234409, 678901234410, 546000000000,
> 000000000000

If none of those are specified in any of the filters (and I don't think they are
but I haven't gone back to your config to check for sure) then these calls will
be rejected.

>Are there no action required in VAX side ?
>If possible, would you like to let me know any check point in VAX side
>or UNIX side ?

You need to properly define the problem statement.

If the problem is that all calls with the above addresses fail, then the answer
is that the customer's config is setup to make those calls fail. If he has some
reason for letting those calls in, then he should change his config.

If the problem is that once he has 26 SVCs up and running, ,another call comes
in *on an address that should work*, then there may be a real problem. So far
there is no evidence of that at all.

You need to go back to the customer and find out what the real problem is.

Antonio
3750.6Will fix caller.DEKVC::SANGHOKIMMon May 26 1997 04:586
The customer agreeded the application on UNIX machine should be checked.

Thanks for your support.

Sangho Kim