Conference marvin::x25psi

3741.0. "diag code A6, x29 conn alpha to alpha" by MUNICH::SCHALLER (Eva Schaller *DSC* 895-6146) Tue Mar 11 1997 15:02

    My customer runs  OpenVMS alpha 6.2-1h2 with OSI 6.3.
    He has configured native PSI on the alpha. If he connects to another
    alpha, which runs the same SW, he recieves in 90% a Cause code 0,
    diagostic code A6(166) and the connection hangs with USERname
    displayed.
    The other 10% he still sees the diag code, but communication works fine
    
    The same connection (set host/x) to a VAX or from a VAX to this Alpha, 
    always works, so I don't believe, that there is an configuration error.
    
    I couldn't find this diagnostic code, it may help for tracking down the
    problem. Is somebody willing to look into a trace (I'm not very
    experienced with traces) and if, which tracepoints should I use?
    
    x25l3?
    
    If this problem is already known or fixed, please let me know.
    Otherwise I would appreciate hints, how to analyse this problem
    
    thanks and best regards
    eva

>    He has configured native PSI on the alpha. If he connects to another

On the Alpha it's X25 not PSI and is a separately installable item - i.e. it
does not come as part of DECnet-Plus.

>    The same connection (set host/x) to a VAX or from a VAX to this Alpha, 
>    always works, so I don't believe, that there is an configuration error.

What profile and physical connection are in use?

Post an X25L3 trace in OZROCK::X25_AVMS (the conference where the Alpha X.25
devos hang out).

Antonio

    Antonio, thanks for the answer, I will place the call in to correct
    notesfile. Sorry also for the naming error..
    regards eva