| Title: | DEC TCP/IP Services for OpenVMS |
| Notice: | Note 2-SSB Kits, 3-FT Kits, 4-Patch Info, 7-QAR System |
| Moderator: | ucxaxp.ucx.lkg.dec.com::TIBBERT |
| Created: | Thu Nov 17 1994 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 5568 |
| Total number of notes: | 21492 |
Folks
I have a problem with a customer over here in the UK. He is running UCX
V3.3 on VMS V5.5-2h4. I know it is an old version, but the customer has
a prior version support contract on his system.
When his system gets to about 80 or so users, anymore subsequent telnet
connections are refused with an insufficient resources message.
Although his system can take more decnet connections. The customer has
tried a number of autogens but to no avail.
Can anyboy point me in the right direction. UCX is not something I
usually suport, and I am struggling a little on this one.
Regards
Steven Freke
UK CSC
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 5469.1 | YAKKA::KINGSMILL | Geoff Kingsmill, Australia | Fri Apr 25 1997 19:06 | 10 | |
Steven,
Do a "ucx show service telnet/full" and see if the Active or Peak users
is at the Limit. If so then you need to do the following:-
$ ucx disable service telnet
$ ucx set service telnet/limit=x
$ ucx enable service telnet
Cheers,
Geoff..
| |||||
| 5469.2 | looak at the following URL | BACHUS::ROELANDTS | Wa d'es ma da ve ne stuut | Mon Apr 28 1997 07:55 | 13 |
Re .0 & .1
Not only the service limit on telnet is important, read the following
document, it will give you much more information :
http://www-mcs.iso.dec.com/ucx_tuning.html
Regards,
Guy
| |||||
| 5469.3 | much appreciatted | thesun.uvo.dec.com::FREKES | Like a thief in the night | Tue Apr 29 1997 05:16 | 4 |
Thanks for the pointers.
regards
Steven
| |||||