| Title: | open3d |
| Notice: | Kits on notes 3 and 4; Documents note 223 |
| Moderator: | WRKSYS::COULTER |
| Created: | Wed Dec 09 1992 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 1306 |
| Total number of notes: | 5260 |
Hi !
A Customer of mine has dec 3000-600 with zlx-e1 (PMAGD-AA).
He was running unigraphics 11.1 on digital unix 3.2 & open3d 3.4.
Recently we have upgraded this workstation with digital unix 4.0b
& Open3d 4.2. This was done for loading unigraphics 12.0.
Now after upgrading Operating system & unigraphics versions
we are not able to run Unigraphics with 3d option (i.e using OSF
OpenGL).
UG is getting started with 2d option. If we select 3d option in ugmenu
& apply, it shows eds-unigraphics banner but is unable to open the
UG main screen.
All the subsets required for running UG are loaded properly.
OpenUnigraphics 3d4.2 documentation says it supports PMAGD-AA graphics card.
Any help in above context is appreciated. Thanks in advance
regards,
Hemant Doshi
MCS - DE(I)L Pune
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 1300.1 | WRKSYS::COULTER | If this typewriter can't do it, ... | Wed May 28 1997 07:58 | 6 | |
Well, are any other OpenGL programs running?
What's the contents of the server log file?
Is the Open3D license installed?
| |||||
| 1300.2 | WRKSYS::CHALTAS | Who asked me, anyway? | Wed May 28 1997 08:40 | 6 | |
Other things to check:
If your run xglinfo, does it list any visuals as supporting GL?
Have you checked the UG error log (it's in /var/tmp)?
| |||||
| 1300.3 | run the O3D IVP... | ALLVAX::DONAHUE | Thu May 29 1997 14:34 | 20 | |
Run the Open3D Installation verification program:
/usr/bin/X11/gl_ivp
This will verify the Open3D install against your graphics environment.
Also, check the subset list to see if all the O3D* subsets got loaded
correctly:
setld -i |more
There is a specific subset for the ZLX-E* cards that needs to be
loaded. At the end of the O3D* install, the kernel will be rebuilt
to include the correct entries for Open3D.
Unigraphics V12 does support the E1 card...so it sounds like there's an
Open3D installation problem - especially if you were able to run in OGL
mode while in UG v11.
Hope this helps,
Bill Donahue
MESC Technical Applications Helpdesk
| |||||