Title: | GUITARnotes - Where Every Note has Emotion |
Notice: | Discussion of the finer stringed instruments |
Moderator: | KDX200::COOPER |
Created: | Thu Aug 14 1986 |
Last Modified: | Fri Jun 06 1997 |
Last Successful Update: | Fri Jun 06 1997 |
Number of topics: | 3280 |
Total number of notes: | 61432 |
I have an old Schaller swell pedal that isn't working properly. It's OK at full frontal top volume, but won't back off all the way to total silence i.e there's always something there, although it is quite quiet on the fully off position. Is there anything I can do to fix this? Cheers, Bob
T.R | Title | User | Personal Name | Date | Lines |
---|---|---|---|---|---|
2172.1 | SOLVIT::FRASER | But I don't have an accent; you do! | Tue Apr 23 1991 09:32 | 13 | |
The older pedals usually worked by a mechanical linkage from the pedal to a pot(entiometer). When you take it apart, you'll probably find a collar of some kind fixed to the shaft of the pot. The pot has distinct stops, like any volume control, so what you do is loosen the collar, turn the pot to the OFF end of it's rotation and then re-tighten the collar with the pedal at it's minimum volume position. This _may_ cost you some top-end volume, depending on how well the linkage is designed, slop/play etc., so you may have to compromise a little when locking up the collar. Andy | |||||
2172.2 | WELCLU::GREENB | Sex party! Sex party!! | Tue Apr 23 1991 09:58 | 5 | |
That sounds like it, Andy - it is one of those type of swell pedals. Thanks, Bob | |||||
2172.3 | SOLVIT::FRASER | But I don't have an accent; you do! | Tue Apr 23 1991 10:18 | 4 | |
No problem, Bob - let us know if it works... Andy | |||||
2172.4 | CHEFS::BRIGGSR | They use computers don't they? | Wed Apr 24 1991 05:25 | 6 | |
I bought one of those last Christmas here in Reading UK! Must say, there's more to using one of these than meets the eye (other than just as a foot controlled volume pedal). Richard | |||||
2172.5 | WELCLU::GREENB | It's gon' rain | Wed Apr 24 1991 05:37 | 6 | |
Andy, Thanks, 'tis now fixed and working perfectly! However, I now have a problem with an MXR Distortion+ pedal....!! Bob |