| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 1232.1 | try roy | WMOIS::S_BRYSON | | Mon Mar 27 1989 13:36 | 8 |
| Yes!!!
Roy Good runs a small shop (Goodesound?) above Cambridge music.
He can go on for hours talking about vintage stuff and VOX in
particular. He did a good job with the active electronics on my
VOX Grand Prix and even sent a copy of the schematics.
btw / I'm always looking for VOX's to buy
|
| 1232.2 | Dunlop CryBaby | AQUA::ROST | DWI,favorite pastime of the average guy | Mon Mar 27 1989 17:14 | 4 |
|
The old VOX CryBaby wahs are now manufactured by Jim Dunlop and
these are easy to find. Though many will claim the old ones are
better...scratchier, for sure 8^) 8^) 8^)
|
| 1232.3 | no brag, just fact | RICKS::CALCAGNI | | Mon Mar 27 1989 19:01 | 6 |
| I have an old Dallas Arbiter wah, reputedly built in the same Italian
factory that supplied VOX. Yeah, it's grundgy but it does have
a cooler sound than the Dunlop. More of a bite to the wah, if
ya know what I mean.
/rick
|
| 1232.4 | | DNEAST::BOTTOM_DAVID | Deeper in Debt | Tue Mar 28 1989 10:03 | 5 |
| Anybody have a source for the pots with the little gear on them?
My old VOX wah has one very noisy pot, the local guy want $23 for
a new one (which he has in stock...but $23??)
dbii
|
| 1232.5 | | SQUID::GOODWIN | I've got a mind to give up livin' | Tue Mar 28 1989 13:04 | 7 |
| I have a spare one of those pots w/ gear which I ordered directly
from Dunlop. It didn't cost $23.00, but I do recall it wasn't cheap.
At home I have the Dunlop address and price list. If you would like
me to send you a copy, drop me a quick vaxmail.
Steve
|
| 1232.6 | Newark has them | LEDS::ORSI | See the man with the Stage fright | Tue Mar 28 1989 13:32 | 27 |
| Re-.4
Last year I bought six Allen-Bradley 500K ohm log taper pots
from Newark specifically for pedal pot replacement. They have
2" aluminum shafts which can be cut to any length, but don't
come with the little gear. You'll have to press or pin it on
your self, as I did.
Catalog #110 pg. 212
Newark Part # Style RV4N Type J 2 Watt Log Pots
10F563 (A-B part #JA1N200P504AA-CW) 500K ohm 2" shaft Type J
10F562 (A-B part #JA1N200P254AA-CW) 250K ohm " " " "
$5.34 each VISA-MC
Newark Electronics
98 Spitbrook Rd.
Nashua, NH 03062-5736
(603) 888-5790
FAX: (603) 888-6965
There are many branches through out the country, but this one
is the closest one to you. Check the catalog for more.
Neal
|
| 1232.7 | Pot cleaner! | FOO::BHAVNANI | SYS$UNWIND - laid back VMS | Tue Mar 28 1989 13:38 | 10 |
| Re: .4 by DNEAST::BOTTOM_DAVID
> Anybody have a source for the pots with the little gear on them?
> My old VOX wah has one very noisy pot,...
I'd try (Radio Shack perhaps) a few drops of pot cleaner fluid
(about $1.99 a can) before replacing the pot. It did wonders for
my old wah.
/ravi
|
| 1232.8 | Limited travel? | FOO::BHAVNANI | SYS$UNWIND - laid back VMS | Tue Mar 28 1989 13:41 | 5 |
| I found the travel on the Dunlop pedal to be very limited. The
SolaSound had a nice 60 degree travel that would let you do
cruel things to the harmonics when pulled all the way back.
/ravi
|
| 1232.9 | | DNEAST::BOTTOM_DAVID | Deeper in Debt | Tue Mar 28 1989 13:44 | 8 |
| re: pot cleaner
In my case this crap (from Rat shack) made my pot worse, to the
point that I retired the Wah...I'll never use it again on anything.
dbii
ps: thanks to those who answered...I'm checking out the options
|
| 1232.10 | "Sounds as good as new" | HPSCAD::GATULIS | Frank Gatulis | Wed Mar 29 1989 14:59 | 11 |
| Re: pot with gear
Funny thing, I just replaced the pot on my VOX Wah last week. Bought
a replacement for about $2 at the radio shack. The gear on the
original is in there with a drive pin. Just tap it out and use it
on the new pot. Of course you have to cut the new shaft to length
and drill it for the pin. Couldn't have taken more than 15 minutes!
I think my pedal's 20+ years old and this is my 3rd pot.
Frank
|