| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 4867.1 | Yes, do a dir/title=SEDT | PAMSRC::63653::BARRETT | I did not see Elvis | Mon Jul 01 1991 16:54 | 0 |
| 4867.2 | | RGB::ROSE | | Mon Jul 01 1991 18:03 | 4 |
| There's a nice little editor on FF297 named JED. It's base on EMACS,
but it is much smaller and a little more user friendly. It's especially nice
if your system is floppy based because you can delete ED and EDIT and install
JED in less space.
|
| 4867.3 | Thanks! | KAHUNA::SUMNER | | Mon Jul 01 1991 19:27 | 2 |
|
|
| 4867.4 | DME | NITMOI::WITHERS | Another Hallmark Moment. -Al Bundy | Tue Jul 02 1991 13:58 | 6 |
| Personally, I use DME (Matt Dillon's editor). Its fast, full featured,
etc. I also use the DME config file that makes the keypad act EDTish.
I preferred this to SEDT.
George
|
| 4867.5 | QED anyone? | TOOK::DROBINSON | | Tue Jul 02 1991 14:07 | 4 |
| Although I haven't made a full comparison, I like QED, available on
the Fish disks.
Dave
|
| 4867.6 | | KAHUNA::SUMNER | | Tue Jul 02 1991 16:35 | 7 |
|
George,
Is DME on [UPLOAD] or a fish disk?
~Ray
|
| 4867.7 | | BOMBE::MOORE | Amiga: Where 'multimedia' REALLY began | Tue Jul 02 1991 17:17 | 1 |
| DME v1.42 is on Fish #441.
|
| 4867.8 | DME is great!! | UFHIS::SFISCHER | | Thu Jul 04 1991 05:08 | 11 |
| jop!Must agree with -.??! DME is one of the best Editors I know!You can
programm every key with every function you need, using DME's
programming language! Theoricaly, you can programm F1 to make a backup
of the file, exchange a word with another, save the file again, and
bring the ARP file requester for loading a new doc!!
If you want a programmers editor, that's the one you need!!
so long,
sammy
-----
|
| 4867.9 | QED105.LZH on TAPE | TOOK::DROBINSON | | Mon Jul 08 1991 14:59 | 7 |
| I guess I was wrong in .5. QED is not on the Fish disks. I don't
recall where I got it, an announcement in here or from AB20 ftpmail, but
I uploaded the latest version I have to TAPE::AMIGA:[UPLOAD]QED105.LZH
TAPE::AMIGA:[UPLOAD]QED105.README
I'll put a copy of the readme file in the old QED note too.
Dave
|
| 4867.10 | | AGNESI::MARK | Waltzing with Bears | Mon Jul 08 1991 16:46 | 8 |
| I use mg3a, which is an emacs variant available on the net here
somewhere. It's very tailorable, and has a good AREXX interface. As an
example, I wish it provided a built in form of crash recovery (e.g. journalling,
auto-save, etc.). I was able to add this, though, with an AREXX routine that
gets run from dcron every five minutes and cause the editor to save all modified
buffers.
Mark
|
| 4867.11 | vi | VARESE::FRANZONI | Blue like a Blues | Fri Jul 12 1991 19:20 | 4 |
| ...if you are looking for sEDT styled editors this could not be of interest
to you ... but you can also consider steVIe (simply try this editor for
vi enthusiasts) that's a 90% compatible AMIGA porting of the U**X's
vi editor.
|