| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 4813.1 | PS on Amiga or VMS ? | TRUCKS::BUSSINK_E | � ��k� W�t�h��g H��v��l� B�d��$ | Tue Jun 11 1991 11:12 | 5 |
| This might be a stupid question. But if you print your files on
a LPS20 and LN03+, did you created the PS file on an Amiga or on VMS ?
Erik
:-)
|
| 4813.2 | PS on VMS. | LNKHUB::SOKURA | Put your foot in the air.. | Wed Jun 12 1991 03:22 | 9 |
|
I've created the PS file on VMS.Do you think it would be different
if I tried to create it on AMIGA?
Do you have a similar problem Erik? I read your earlier note about
IFF2PS, is it the same as CLAZ?
Have you tried to create the PS file om AMIGA instead?
Jhonny
|
| 4813.3 | | TRUCKS::BUSSINK_E | � ��k� W�t�h��g H��v��l� �d��$ | Wed Jun 12 1991 03:45 | 8 |
| I created PS files with CLAZ on the VMS, and they were compressed, same
with the IFF2PS on the amiga. They only change I've noticed with the
IFF2PS v2.0 is that I get a error on the printer at the end. I will try
tonight to make a PS file with CLAZ on the amiga.
Erik
BTW can anybody tell, were to find some information on the Postscript
language, and how to increase the size of a pictures from A4 to A3.
|
| 4813.4 | REGENT::POSTSCRIPT | BOMBE::MOORE | Amiga: Where 'multimedia' REALLY began | Wed Jun 12 1991 04:44 | 20 |
| re: PostScript info
Any bookstore with a decent computer section should have the Adobe
PostScript reference series:
PostScript Language Reference Manual
[ "Red book" ]
ISBN 0-201-18127-4
PostScript Language Program Design
[ "Green book" ]
ISBN 0-201-14396-8
PostScript Language Tutorial and Cookbook
[ "Blue book" ]
ISBN 0-201-10179-3
All published by Addison-Wesley.
You might find some answers in the PostScript conference...
|
| 4813.5 | Why PostScript or LN03 ? | WELLIN::FINNIS | | Wed Jun 12 1991 18:36 | 18 |
|
Possibilities:-
[1] Why not borrow a la50 or equivalent for a night and print it ?
[2] Post the circuit and we can have a go
[3] Or try csix and convert it to sixel on the vax and print it
Only problem I have is if the background that the IFF was made in
is dark, it makes the picture difficult to read ( CLAZ ) .
So it gets imported into a paint package and modified.
-Pete-
|
| 4813.6 | Try CLAZ.DOC... | LNKHUB::SOKURA | Put your foot in the air.. | Thu Jun 13 1991 10:46 | 10 |
|
Hi again,
I found the document CLAZ.DOC on TAPE""::AMIGA:[AMIGA.USENET.DOC]
and in that document I found that you should supply the picture
size of the IFF image.
I tried that and I got a much better printout then.
/Jhonny
|
| 4813.7 | problem | XSTACY::PATTISON | Too sexy for my VT100 | Fri Dec 20 1991 08:04 | 7 |
|
If I try to run CLAZ (VMS) on a HAM IFF file which was produced by
GIF2IFF (again VMS) then after a few moments I get
%SYSTEM-F-ACCVIO, access violation, reason mask=00, ...etc
Dave
|