| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 4806.1 | Pro Board,Pro Net | SALEM::LEIMBERGER | | Tue Jun 11 1991 06:17 | 8 |
| Their are two products on the shelp as System Eyes. They are(if my
memory serves me right)Pro Net, and Pro Board. I think one does the
schematic layout,and the other the net listings etc. I will look at
them the next time I drop down there. These products have survived
for awhile now so i assume they are mature. I haven't picked them up
because I don't do board layout. I do work with net files here at
DEC so I contemplated picking up Pro Net to see what it does.
bill
|
| 4806.2 | one package now | ARRODS::GOLDSTEIN | Steve G DTN: 847-5416/5455 | Tue Jun 11 1991 08:06 | 11 |
|
You can get Pro-Board and Pro-Net as 1 package now and there is also a
newer version ...
Expect to pay approx 170 UK Pounds...(for the combined package)
Steve
|
| 4806.3 | | ELWOOD::PETERS | | Tue Jun 11 1991 10:46 | 10 |
|
Pro-board is a board layout package while Pro-net is a
Schematic entry system. The Pro-net package creates files for
Pro-board ( net list, parts ... ).
I have used the older versions, but I have not had a chance to
check out the new, lower cost, combined version.
Steve P.
|
| 4806.4 | Could you expand on that ? | WELLIN::FINNIS | | Wed Jun 12 1991 18:44 | 13 |
| I take it then Board Master is not that popular..
Re.. Pro-Board Pro-Net, How much memory does it eat, how long does an
autoroute take .. ?
How do you get the Netlist into your package used at DEC ?
You don't mean ORTSchema surely....!
>> The latest combined version ? What is the latest version number
and do you mean combined as in both packages in the same box, or
combined program ?
-Pete-
|
| 4806.5 | | ELWOOD::PETERS | | Fri Jun 14 1991 11:48 | 7 |
|
re .4
Pro-Net doesn't auto route. It helps you route the traces by hand.
Steve P.
|
| 4806.6 | | SDOGUS::WILLIAMS | TOPGUN | Fri Jun 14 1991 16:31 | 13 |
| Pete
I use BoardMaster. I like it. It does do auto routing. I don't know
if it is popular or not, but look at what most folks buy that is
"popular". Second, it is cheaper and has a better price performance
than anything else I can think of in the PCB market.
Call Blackbelt software for more information. They are 7 hours GMT
earlier than you are, and the number is: (Country code for USA)
406.367.5509
These are the HAM-E folks and the CLICK FAX folks, etc.
Clark
|