| Title: | AMIGA NOTES |
| Notice: | Join us in the *NEW* conference - HYDRA::AMIGA_V2 |
| Moderator: | HYDRA::MOORE |
| Created: | Sat Apr 26 1986 |
| Last Modified: | Wed Feb 05 1992 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 5378 |
| Total number of notes: | 38326 |
My 2000 randomly boots as either a NTSC or a PAL machine, with a 50/50
chance either way.
Since it should be in PAL mode it is a damn nusience!!!
Any ideas - is it likely to be a jumper that maybe loose or what.
It may be some sort of a machine problem as I have also recently
backup/reformat/restore the system partition and it is running
differently. For example I now can't run Qmouse without a GURU - no
problem before.
regards
kevin
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 4543.1 | J102 Agnus pin 31 | CSC32::A_ANDERSON | DTN 592-4170 NSU/VAX | Sat Feb 23 1991 17:53 | 12 |
There is a jumper that does this. J102 if installed you get NTSC if
removed you get PAL. I have a switch hooked to mine. A very useful
$1.50 mod. The actual jumper on mine was a solder bridge. In your
case it could be partially removed leaving a small bridge with a poor
contact. Look on page F-11 of the amiga 2000 manual the Fat agnus pin
31 Test.
If my memory serves me right. Facing the 2000 it was to the left of
the FAT Agnus chip. Around the front left corner of the chip.
Alan
| |||||
| 4543.2 | Thank,s look into it tonite | MEO78B::MANDERSON | Amiga + '030 == MicroCRAY | Sun Feb 24 1991 03:03 | 1 |